11 material differences · fewer than 12
Tractor oneHanomag Perfekt 401 (S)1964–1967No measured PTO figureTractor twoInternational Harvester 240 Utility1958–1961No measured PTO figure
Which should you choose?
Read our verdict on the Perfekt 401 (S) and the 240 Utility → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
11 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | Perfekt 401 (S) | 240 Utility | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 31 hp | 31.5 hp | — |
| Engine declared | Hanomag-Borgward D 301 R | INTERNATIONAL HARVESTER C-123 | differs |
| Displacement declared | 1.80 L | 2.01 L | +12% 240 Utility |
| Maximum torque declared | 73 lb·ft · 99 N·m | 101 lb·ft · 137 N·m | +38% 240 Utility |
| Transmission | |||
| Top speed declared | 12.4 mph · 20 km/h | 14.3 mph · 23 km/h | +15% 240 Utility |
| Clutch declared | dual clutch by Fichtel & Sachs | Pedal-operated dry Rockford single-plate clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 5.0 gpm · 19.0 L/min | 6.0 gpm · 22.8 L/min | +20% 240 Utility |
| Rear PTO speeds declared | 540 rpm | 540 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 3,924 lb · 1,780 kg | 3,638 lb · 1,650 kg | +8% Perfekt 401 (S) |
| Wheelbase declared | 80.1 in · 2,035 mm | 75.0 in · 1,905 mm | +7% Perfekt 401 (S) |
| Length declared | 133.1 in · 3,380 mm | 116.0 in · 2,946 mm | +15% Perfekt 401 (S) |
| Width declared | 62.2 in · 1,580 mm | 63.0 in · 1,600 mm | — |
| Ground clearance declared | 15.7 in · 400 mm | 17.0 in · 432 mm | +8% 240 Utility |
| Turning radius, braked declared | 11.2 ft · 3.40 m | — | — |
| Fuel tank declared | 49.7 qt · 47 L | 64.8 qt · 61.3 L | +30% 240 Utility |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Hanomag Perfekt 401 (S) sources
- Source: Traktorenlexikon, “Hanomag Perfekt 401 (S)”
International Harvester 240 Utility sources
- Source: Traktorenlexikon, “IHC 240”
- Source: Traktorenlexikon, “McCormick Farmall Super-A 1”