6 material differences · fewer than 12
Tractor oneInternational Harvester 10-201923–1939No measured PTO figureTractor twoLanz D 75061934–1935No measured PTO figure
Which should you choose?
We will not advise between these two machines, because their unladen weight differs by more than 25% (54%). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.
Field by field
6 material differences · 2 fields identical or within 5%, which is not counted as material
| Field | 10-20 | D 7506 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 20.0 hp | 19.6 hp | — |
| Engine declared | INTERNATIONAL HARVESTER 284 | — | — |
| Displacement declared | 4.65 L | — | — |
| Transmission | |||
| Top speed declared | 4.3 mph · 7.0 km/h | 9.4 mph · 15.2 km/h | +117% D 7506 |
| Clutch declared | pedal operated dry single plate clutch | Pedal operated three-shoe clutch including clutch brake | differs |
| Hydraulics & hitch | |||
| Rear PTO speeds declared | 661 rpm | 760 | differs |
| Weight & dimensions | |||
| Unladen weight declared | 4,010 lb · 1,819 kg | 6,173 lb · 2,800 kg | +54% D 7506 |
| Wheelbase declared | 78.0 in · 1,981 mm | 66.3 in · 1,683 mm | +18% 10-20 |
| Length declared | 123.0 in · 3,124 mm | 112.0 in · 2,845 mm | +10% 10-20 |
| Width declared | 60.0 in · 1,524 mm | 62.9 in · 1,598 mm | — |
| Ground clearance declared | — | 10.6 in · 270 mm | — |
| Fuel tank declared | — | 52.8 qt · 50 L | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
International Harvester 10-20 sources
- Source: Traktorenlexikon, “IHC 10-20”
- Source: Traktorenlexikon, “McCormick 10-20”
Lanz D 7506 sources
- Source: Traktorenlexikon, “Lanz D 7506/2”