• Rigid chassis
  • WhichTractor size: Utility
  • Not independently tested
  • 1970–1980

WhichTractor size, not the maker’s category

Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is

IMT 588 Full specifications

IMR-PERKINS M-34/T four-cylinder diesel. The manufacturer claimed 57.3 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.

Engine power, claimed · gross or net not stated

57.3 hp

42.7 kW as stated by the source

Not independently tested

Claimed · standard not stated by the source

Source · Traktorenlexikon, “IMT 558”, claimed

Weight
5,071 lb
3-point lift
2,469 lb
Hyd. flow
4.0 gpm
Top speed
13.7 mph

IMT 588 specs: key facts

  • The IMT 588 was built from 1970 to 1980.

  • The IMT 588 has a claimed engine power (gross or net not stated) of 42.7 kW (57.3 hp); it has no measured PTO figure.

  • The IMT 588 is two-wheel drive (2WD).

  • The IMT 588 has a IMR-PERKINS M-34/T engine, a 4-cylinder 3.34 L diesel unit.

  • The IMT 588 weighs 2,300 kg (5,071 lb) unladen.

  • The IMT 588 has a rear PTO running at 540 rpm.

  • The three-point hitch of the IMT 588 lifts 1,120 kg (2,469 lb) at the lower-link ends.

  • The hydraulic pump of the IMT 588 delivers 15.1 L/min (4.0 gpm).

Source · Traktorenlexikon, “IMT 558”

How much horsepower does a 588 have?

The only figure for the 588 is 57.3 hp (42.7 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.

Engine, claimed (gross/net not stated)
57.3 hp

Source · Traktorenlexikon, “IMT 558”

What engine is in a 588?

A 588 has an IMR-PERKINS M-34/T, a 4-cylinder 3.34 L diesel engine.

Engine — 588 engine specifications
Make & modelIMR-PERKINS M-34/T
Cylinders4, liquid-cooled
Displacement203.6 ci · 3.34 L
Max torque154 lb·ft · 209 N·m @ 1,300 rpm

Source · Traktorenlexikon, “IMT 558”

How much will a 588 lift, and what is its hydraulic flow?

A 588 lifts 2,469 lb (1,120 kg) at the lower-link ends of its Category 2 three-point hitch.

Hydraulics & PTO — 588 hydraulics and PTO specifications
Pump flow4.0 gpm · 15.1 L/min
Hitch categoryCategory 2
Lift at ends2,469 lb · 1,120 kg
Rear PTO540 rpm @ 1,688 engine rpm

Source · Traktorenlexikon, “IMT 558”

What transmission does a 588 have?

Transmission specifications for the 588 are below.

Transmission — 588 transmission specifications
ClutchPedal-operated, dry two-stage KRON-NOVI double clutch
BrakesPedal-operated, dry drum brake acting on differential side shafts
SteeringMechanically operated worm steering
Top speed13.7 mph · 22 km/h

Source · Traktorenlexikon, “IMT 558”

How much does a 588 weigh?

A 588 weighs 5,071 lb (2,300 kg) unladen.

Weights & dimensions — 588 weights and dimensions
Unladen weight5,071 lb · 2,300 kg
Wheelbase83.4 in · 2,118 mm
Length146.3 in · 3,715 mm
Width71.2 in · 1,808 mm
Height63.7 in · 1,618 mm
Ground clearance16.9 in · 430 mm
Front track47.2 in · 1,200 mm
Rear track55.1 in · 1,400 mm
Turning radius, braked12.5 ft · 3.80 m

Source · Traktorenlexikon, “IMT 558”

Which tractors compare with a 588?

Within 10% of its 43.2 hp at the PTO (claimed), the same type, and first built within 15 years of it.

Everything else people ask

Is a 588 two-wheel drive or four-wheel drive?

The IMT 588 is two-wheel drive (2WD).

What PTO does a 588 have?

A 588 has a 540 rpm rear PTO.

Where this page comes from

Compiled from Traktorenlexikon, “IMT 558”.

Last verified

Not yet verified

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. Traktorenlexikon: IMT 558CC BY-SA 4.0, WIKIBOOKS-TL-120959 · revision 1058951. Wikibooks contributors (Traktorenlexikon). Original document