8 material differences · fewer than 12

Tractor oneFiat 400 V/E1968–1971No measured PTO figureTractor twoHermann Lanz D 6341974–1978No measured PTO figure

Which should you choose?

Read our verdict on the 400 V/E and the D 634 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

Field by field

8 material differences · 3 fields identical or within 5%, which is not counted as material

Fiat 400 V/E and Hermann Lanz D 634, field by field
Field400 V/ED 634Gap
Engine
Engine power, claimed claimed34 hp33.4 hp—
Engine declaredO.M.-FIAT 8035.01.201MWM D 226-2differs
Displacement declared2.34 L2.08 L+13% 400 V/E
Maximum torque declared103 lb·ft · 140 N·m——
Transmission
Top speed declared15.5 mph · 25 km/h17.5 mph · 28.1 km/h+12% D 634
Clutch declaredPedal operated two-stage dry FEREDO double clutch——
Hydraulics & hitch
Pump flow declared5.8 gpm · 21.8 L/min——
Rear PTO speeds declared540 rpm580/1120 rpmdiffers
Weight & dimensions
Unladen weight declared3,549 lb · 1,610 kg3,924 lb · 1,780 kg+11% D 634
Wheelbase declared74.2 in · 1,885 mm81.9 in · 2,080 mm+10% D 634
Length declared127.2 in · 3,230 mm129.9 in · 3,300 mm—
Width declared38.6–43.3 in · 980–1,100 mm59.8 in · 1,520 mmdiffers
Ground clearance declared13.4 in · 340 mm13.0 in · 330 mm—
Fuel tank declared57.1 qt · 54.0 L37.0 qt · 35 L+54% 400 V/E

Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.

Fiat 400 V/E sources

Source
  • Source: Traktorenlexikon, “Fiat 400 V/E”
  • Source: Traktorenlexikon, “Someca 400”

Hermann Lanz D 634 sources

Source
  • Source: Traktorenlexikon, “HELA D634”