WhichTractor
  • Rigid chassis
  • WhichTractor size: Utility
  • No lab test on file
  • 1951–1953
  • 330 built

WhichTractor size, not the maker’s category

The source says so, in a sentence about this machine. How we decide what a machine is

Hanomag R 28N specs: hp, weight, years

The manufacturer claimed 28 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.

Engine power, claimed · gross or net not stated

28 hp

21 kW as stated by the source

No lab test on file

Claimed · standard not stated by the source

Source · Traktorenlexikon, “Hanomag R 28 N”, claimed

This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.

Weight
3,836 lb
Hyd. flow
3.2 gpm
Top speed
10.4 mph

Hanomag R 28N specs: key facts

  • The Hanomag R 28N was built from 1951 to 1953.

  • The Hanomag R 28N has a claimed engine power (gross or net not stated) of 21 kW (28 hp); it has no measured PTO figure.

  • The Hanomag R 28N is two-wheel drive (2WD).

  • The Hanomag R 28N weighs 1,740 kg (3,836 lb) unladen.

  • The Hanomag R 28N has a rear PTO running at 1430 rpm.

  • The hydraulic pump of the Hanomag R 28N delivers 12.0 L/min (3.2 gpm).

Source · Traktorenlexikon, “Hanomag R 28 N”

How does the R 28N compare with its class?

  • Limitation:

    A hydraulic pump flow of 12 L/min is low for its class — 31% below the median of 17.3 L/min across the 62 machines within 10% of its power that hold this figure.

  • Strength:

    Ten forward gears is high for its class — 67% above the median of 6 across the 122 machines within 10% of its power that hold this figure.

Derived by WhichTractor from 124 comparable records. How we work this out

Illustration of the 1951–1953 Hanomag R 28 N, a 28 hp farm tractor, colour not recorded — shown unpainted · operator station not recorded — shown as an open platform, a drawing generated from its specification record
Illustration — not a photograph · colour not recorded — shown unpainted · operator station not recorded — shown as an open platform

How much horsepower does an R 28N have?

The only figure for the R 28N is 28 hp (21 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.

Engine, claimed (gross/net not stated)
28 hp

Source · Traktorenlexikon, “Hanomag R 28 N”

How much will an R 28N lift, and what is its hydraulic flow?

Hydraulic and PTO specifications for the R 28N are below.

Hydraulics & PTO — R 28N hydraulics and PTO specifications
Pump flow3.2 gpm · 12.0 L/min
Rear PTOtransmission-driven, 1430 rpm

Source · Traktorenlexikon, “Hanomag R 28 N”

What transmission does an R 28N have?

Transmission specifications for the R 28N are below.

Transmission — R 28N transmission specifications
ClutchSingle-disc dry clutch
SteeringZF Ross steering
Top speed10.4 mph · 16.8 km/h

Source · Traktorenlexikon, “Hanomag R 28 N”

How much does an R 28N weigh?

An R 28N weighs 3,836 lb (1,740 kg) unladen.

Weights & dimensions — R 28N weights and dimensions
Unladen weight3,836 lb · 1,740 kg
Maximum permissible mass4,740 lb · 2,150 kg
Wheelbase70.9 in · 1,800 mm
Length111.4 in · 2,830 mm
Width62.2 in · 1,580 mm
Height57.1 in · 1,450 mm
Ground clearance12.2 in · 310 mm
Front track51.2 in · 1,300 mm
Rear track51.2 in · 1,300 mm
Turning radius, braked10.2 ft · 3.10 m

Source · Traktorenlexikon, “Hanomag R 28 N”

What oil does an R 28N take, and how much?

An R 28N engine takes 7.4 qt (7 L). Single source, not independently verified — always confirm against the operator’s manual for your machine.

R 28N fluid capacities, grades and service intervals
SystemCapacity
Engine oil7.4 qt · 7 LSource: Traktorenlexikon, “Hanomag R 28 N” · single source, not independently verified
Transmission26.4 qt · 25 LSource: Traktorenlexikon, “Hanomag R 28 N” · single source, not independently verified
Cooling system14.8 qt · 14 LSource: Traktorenlexikon, “Hanomag R 28 N” · single source, not independently verified

Always confirm against the operator’s manual for your machine before service.

Which tractors compare with an R 28N?

Within 10% of its 27 hp at the PTO as the maker claimed it, with no laboratory test on file, the same type, and first built within 15 years of it.

Common questions about the Hanomag R 28N

Is an R 28N two-wheel drive or four-wheel drive?

The Hanomag R 28N is two-wheel drive (2WD).

What PTO does an R 28N have?

An R 28N has a 1430 rpm rear PTO.

Sources and how this page was built

Compiled from Traktorenlexikon, “Hanomag R 28 N”.

Sources checked

14 SEP 2026

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. Traktorenlexikon: Hanomag R 28 N — CC BY-SA 4.0, WIKIBOOKS-TL-75059 · revision 938248. Wikibooks contributors (Traktorenlexikon). Original document