WhichTractor
  • Rigid chassis
  • WhichTractor size: Standard-size
  • Not independently tested
  • 1951
  • 583 built

It sits on the utility/standard-size boundary, so either size is a fair description. WhichTractor size, not the maker’s category

Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is

Fahr D 30 UL Full specifications

KHD F2L 514 two-cylinder diesel. The manufacturer claimed 29.6 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.

Engine power, claimed · gross or net not stated

29.6 hp

22.1 kW as stated by the source

Not independently tested

Claimed · standard not stated by the source

Source · Traktorenlexikon, “Fahr D 30 UL”, claimed

Weight
4,696 lb
Top speed
12.2 mph

Fahr D 30 UL specs: key facts

  • The Fahr D 30 UL was built in 1951.

  • The Fahr D 30 UL has a claimed engine power (gross or net not stated) of 22.1 kW (29.6 hp); it has no measured PTO figure.

  • The Fahr D 30 UL is two-wheel drive (2WD).

  • The Fahr D 30 UL has a KHD F2L 514 engine, a 2-cylinder 2.66 L diesel unit.Source 1

  • The Fahr D 30 UL weighs 2,130 kg (4,696 lb) unladen.

  • The Fahr D 30 UL has an independent rear PTO running at 540 rpm.

Source · Traktorenlexikon, “Fahr D 30 UL”

How much horsepower does a D 30 UL have?

The only figure for the D 30 UL is 29.6 hp (22.1 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.

Engine, claimed (gross/net not stated)
29.6 hp

Source · Traktorenlexikon, “Fahr D 30 UL”

What engine is in a D 30 UL?

A D 30 UL has a KHD F2L 514, a 2-cylinder 2.66 L diesel engine.

Engine — D 30 UL engine specifications
Make & modelKHD F2L 514
Cylinders2, air-cooledSource 2
Displacement162.3 ci · 2.66 L
Max torque105 lb·ft · 142 N·m @ 1,300 rpmSource 2
Electrical system12 VSource 2

Source · Traktorenlexikon, “Fahr D 270”

How much will a D 30 UL lift?

Hydraulic and PTO specifications for the D 30 UL are below.

Hydraulics & PTO — D 30 UL hydraulics and PTO specifications
Pressure3,129 psi · 216 bar
Rear PTOIndependent, transmission-driven, 540 rpm

Source · Traktorenlexikon, “Fahr D 30 UL”

What transmission does a D 30 UL have?

Transmission specifications for the D 30 UL are below.

Transmission — D 30 UL transmission specifications
ClutchPedal operated dry Fichtel & Sachs single plate clutch
SteeringZF steering type 200 with fixed steering finger
Top speed12.2 mph · 19.6 km/h

Source · Traktorenlexikon, “Fahr D 30 UL”

How much does a D 30 UL weigh?

A D 30 UL weighs 4,696 lb (2,130 kg) unladen.

Weights & dimensions — D 30 UL weights and dimensions
Unladen weight4,696 lb · 2,130 kg
Wheelbase86.4 in · 2,195 mm
Length117.7 in · 2,990 mm
Width59.6 in · 1,515 mm
Height74.4 in · 1,890 mm
Ground clearance11.8 in · 300 mm
Front track50.0–56.9 in · 1,270–1,446 mmWikibooks gives one track for both axles
Rear track50.0–56.9 in · 1,270–1,446 mmWikibooks gives one track for both axles

Source · Traktorenlexikon, “Fahr D 30 UL”

Which tractors compare with a D 30 UL?

Within 10% of its 28 hp at the PTO (claimed), the same type, and first built within 15 years of it.

Everything else people ask

Is a D 30 UL two-wheel drive or four-wheel drive?

The Fahr D 30 UL is two-wheel drive (2WD).

What PTO does a D 30 UL have?

A D 30 UL has a independent 540 rpm rear PTO.

Where this page comes from

Compiled from Traktorenlexikon, “Fahr D 30 UL”; and Traktorenlexikon, “Fahr D 270”.

Last verified

Not yet verified

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. Traktorenlexikon: Fahr D 270 — CC BY-SA 4.0, WIKIBOOKS-TL-37233 · revision 1015530. Wikibooks contributors (Traktorenlexikon). Original document
  2. Traktorenlexikon: Fahr D 30 UL — CC BY-SA 4.0, WIKIBOOKS-TL-103618 · revision 990484. Wikibooks contributors (Traktorenlexikon). Original document