• Rigid chassis
  • WhichTractor size: Standard-size
  • No lab test on file
  • 1981–1991

It sits on the utility/standard-size boundary, so either size is a fair description. WhichTractor size, not the maker’s category

Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is

Ford 7710 specs: hp, weight, years

The manufacturer claimed 96.7 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.

Engine power, claimed · gross or net not stated

96.7 hp

72.1 kW as stated by the source

No lab test on file

Claimed · standard not stated by the source

Source · Traktorenlexikon, “Ford 7710”, claimed

This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.

Weight
9,766 lb
3-point lift
9,381 lb
Hyd. flow
18.2 gpm
Top speed
18.6 mph

Ford 7710 specs: key facts

  • The Ford 7710 was built from 1981 to 1991.

  • The Ford 7710 has a claimed engine power (gross or net not stated) of 72.1 kW (96.7 hp); it has no measured PTO figure.

  • The Ford 7710 is four-wheel drive (4WD).

  • The Ford 7710 weighs 4,430 kg (9,766 lb) unladen.

  • The Ford 7710 has a rear PTO running at 540/1000 rpm.

  • The three-point hitch of the Ford 7710 lifts 4,255 kg (9,381 lb) at the lower-link ends.

  • The hydraulic pump of the Ford 7710 delivers 68.9 L/min (18.2 gpm).

Source · Traktorenlexikon, “Ford 7710”

Illustration of the 1981–1991 Ford 7710, a 97 hp farm tractor, a drawing generated from its specification record
Illustration — not a photograph

How much horsepower does a 7710 have?

The only figure for the 7710 is 96.7 hp (72.1 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.

Engine, claimed (gross/net not stated)
96.7 hp

Source · Traktorenlexikon, “Ford 7710”

How much will a 7710 lift, and what is its hydraulic flow?

A 7710 lifts 9,381 lb (4,255 kg) at the lower-link ends of its Category 2 three-point hitch.

Hydraulics & PTO — 7710 hydraulics and PTO specifications
Pump flow18.2 gpm · 68.9 L/min
Hitch categoryCategory 2
Lift at ends9,381 lb · 4,255 kg
Rear PTO540/1000 rpm @ 1,900 engine rpm
PTO shaft1 3/8"- 6 splines or 1 3/8"- 21 splines

Source · Traktorenlexikon, “Ford 7710”

What transmission does a 7710 have?

Transmission specifications for the 7710 are below.

Transmission — 7710 transmission specifications
ClutchPedal-operated dry single-plate clutch
BrakesPedal-operated wet multi-disc brake acting on rear wheels
Top speed18.6 mph · 30 km/h

Source · Traktorenlexikon, “Ford 7710”

How much does a 7710 weigh?

A 7710 weighs 9,766 lb (4,430 kg) unladen.

Weights & dimensions — 7710 weights and dimensions
Unladen weight9,766 lb · 4,430 kg
Wheelbase97.6 in · 2,479 mm
Length164.7 in · 4,183 mm
Width77.0 in · 1,955 mm
Height110.2 in · 2,800 mm
Ground clearance16.9 in · 430 mm
Front track59.9–79.1 in · 1,521–2,009 mm
Rear track60.0–80.0 in · 1,524–2,032 mm

Source · Traktorenlexikon, “Ford 7710”

What oil does a 7710 take, and how much?

A 7710 engine takes 9.0 qt (8.5 L). Single source, not independently verified — always confirm against the operator’s manual for your machine.

7710 fluid capacities, grades and service intervals
SystemCapacity
Engine oil9.0 qt · 8.5 LSource: Traktorenlexikon, “Ford 7710” · single source, not independently verified
Transmission & hydraulic60.0 qt · 56.8 LSource: Traktorenlexikon, “Ford 7710” · single source, not independently verified
Front axle6.3 qt · 6.0 LSource: Traktorenlexikon, “Ford 7710” · single source, not independently verified
Cooling system18.0 qt · 17.0 LSource: Traktorenlexikon, “Ford 7710” · single source, not independently verified

Always confirm against the operator’s manual for your machine before service.

Which tractors compare with a 7710?

Within 10% of its 96.7 hp of claimed engine power, the same type, and first built within 15 years of it.

Common questions about the Ford 7710

Is a 7710 two-wheel drive or four-wheel drive?

The Ford 7710 is four-wheel drive (4WD).

What PTO does a 7710 have?

A 7710 has a 540/1000 rpm rear PTO on a 1 3/8"- 6 splines or 1 3/8"- 21 splines shaft.

Sources and how this page was built

Compiled from Traktorenlexikon, “Ford 7710”.

Sources checked

14 SEP 2026

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. Traktorenlexikon: Ford 7710 — CC BY-SA 4.0, WIKIBOOKS-TL-91152 · revision 1055057. Wikibooks contributors (Traktorenlexikon). Original document