WhichTractor
  • WhichTractor size: Compact
  • Not independently tested
  • 1981–1991

It sits on the compact/utility boundary, so either size is a fair description. WhichTractor size, not the maker’s category

Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is

Ford 4110 (A) Full specifications

The manufacturer claimed 53.2 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.

Engine power, claimed · gross or net not stated

53.2 hp

39.7 kW as stated by the source

Not independently tested

Claimed · standard not stated by the source

Source · Traktorenlexikon, “Ford 4110”, claimed

Weight
5,820 lb
3-point lift
4,204 lb
Hyd. flow
8.1 gpm
Top speed
18.6 mph

Ford 4110 (A) specs: key facts

  • The Ford 4110 (A) was built from 1981 to 1991.

  • The Ford 4110 (A) has a claimed engine power (gross or net not stated) of 39.7 kW (53.2 hp); it has no measured PTO figure.

  • The Ford 4110 (A) was built in two-wheel drive (2WD) and four-wheel drive (4WD) versions, depending on configuration.

  • The Ford 4110 (A) weighs 2,640 kg (5,820 lb) unladen.

  • The Ford 4110 (A) has a rear PTO running at 540 rpm.

  • The three-point hitch of the Ford 4110 (A) lifts 1,907 kg (4,204 lb) at the lower-link ends.

  • The hydraulic pump of the Ford 4110 (A) delivers 30.7 L/min (8.1 gpm).

Source · Traktorenlexikon, “Ford 4110”

How much horsepower does a 4110 (A) have?

The only figure for the 4110 (A) is 53.2 hp (39.7 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.

Engine, claimed (gross/net not stated)
53.2 hp

Source · Traktorenlexikon, “Ford 4110”

How much will a 4110 (A) lift, and what is its hydraulic flow?

A 4110 (A) lifts 4,204 lb (1,907 kg) at the lower-link ends of its Category 2 three-point hitch.

Hydraulics & PTO — 4110 (A) hydraulics and PTO specifications
Pump flow8.1 gpm · 30.7 L/min
Hitch categoryCategory 2
Lift at ends4,204 lb · 1,907 kg
Rear PTO540 rpm @ 1,799 engine rpm
PTO shaft1 3/8"- 6 splines (Form-1)

Source · Traktorenlexikon, “Ford 4110”

What transmission does a 4110 (A) have?

Transmission specifications for the 4110 (A) are below.

Transmission — 4110 (A) transmission specifications
ClutchFoot-operated dry Borg & Beck single-disc clutch
BrakesPedal-operated wet Girling multi-disc brake acting on rear wheels
SteeringMechanically operated recirculating ball steering including hydraulic power assist
Top speed18.6 mph · 30 km/h

Source · Traktorenlexikon, “Ford 4110”

How much does a 4110 (A) weigh?

A 4110 (A) weighs 5,820 lb (2,640 kg) unladen.

Weights & dimensions — 4110 (A) weights and dimensions
Unladen weight5,820 lb · 2,640 kgtwo-wheel-drive version
Wheelbase77.5 in · 1,969 mmtwo-wheel-drive version
Length135.8 in · 3,450 mmtwo-wheel-drive version
Width68.5 in · 1,740 mm
Height91.7 in · 2,330 mm
Ground clearance13.9 in · 354 mm
Front track50.1–82.2 in · 1,273–2,089 mm
Rear track56.0–80.1 in · 1,422–2,034 mm
Turning radius, braked10.0 ft · 3.05 m

Source · Traktorenlexikon, “Ford 4110”

Which tractors compare with a 4110 (A)?

Within 10% of its 45.6 hp at the PTO (claimed), the same type, and first built within 15 years of it.

Everything else people ask

Is a 4110 (A) two-wheel drive or four-wheel drive?

The Ford 4110 (A) was built in two-wheel drive (2WD) and four-wheel drive (4WD) versions, depending on configuration.

What PTO does a 4110 (A) have?

A 4110 (A) has a 540 rpm rear PTO on a 1 3/8"- 6 splines (Form-1) shaft.

Where this page comes from

Compiled from Traktorenlexikon, “Ford 4110”.

Last verified

Not yet verified

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. Traktorenlexikon: Ford 4110 — CC BY-SA 4.0, WIKIBOOKS-TL-91056 · revision 989497. Wikibooks contributors (Traktorenlexikon). Original document