10 material differences · fewer than 12
Tractor oneFord 4110 (A)1981–1991No measured PTO figureTractor twoUTB U-530 (DTC)1982–1985No measured PTO figure
Which should you choose?
We will not advise between these two machines, because their unladen weight differs by more than 25% (38%). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.
Field by field
10 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | 4110 (A) | U-530 (DTC) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 53.2 hp | 53.2 hp | — |
| Engine declared | — | UTB D-115.050 | — |
| Displacement declared | — | 2.70 L | — |
| Maximum torque declared | 139 lb·ft · 189 N·m | 119 lb·ft · 162 N·m | +17% 4110 (A) |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 14.9 mph · 24 km/h | +25% 4110 (A) |
| Clutch declared | Foot-operated dry Borg & Beck single-disc clutch | Dry double clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 8.1 gpm · 30.7 L/min | 5.8 gpm · 21.8 L/min | +41% 4110 (A) |
| Rear PTO speeds declared | 540 rpm | 540 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 5,820 lb · 2,640 kg | 4,233 lb · 1,920 kg | +38% 4110 (A) |
| Wheelbase declared | 77.5 in · 1,969 mm | 77.2 in · 1,960 mm | — |
| Length declared | 135.8 in · 3,450 mm | 116.9 in · 2,970 mm | +16% 4110 (A) |
| Width declared | 68.5–92.5 in · 1,740–2,350 mm | 61.8–87.2 in · 1,570–2,215 mm | differs |
| Ground clearance declared | 13.9 in · 354 mm | 18.3 in · 465 mm | +31% U-530 (DTC) |
| Turning radius, braked declared | 10.0 ft · 3.05 m | 12.0 ft · 3.65 m | +20% U-530 (DTC) |
| Fuel tank declared | 52.0 qt · 49.2 L | 57.1 qt · 54.0 L | +10% U-530 (DTC) |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Ford 4110 (A) sources
- Source: Traktorenlexikon, “Ford 4110”
UTB U-530 (DTC) sources
- Source: Traktorenlexikon, “UTB U 530”