• WhichTractor size: Standard-size
  • Not independently tested
  • 1978–1984

WhichTractor size, not the maker’s category

Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is

Fiat 680 (DT) Full specifications

FIAT-IVECO 8045.02.270 (370) four-cylinder diesel. The manufacturer claimed 67 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.

Engine power, claimed · gross or net not stated

67 hp

50 kW as stated by the source

Not independently tested

Claimed · standard not stated by the source

Source · Traktorenlexikon, “Fiat 680 /680 DT”, claimed

Weight
7,275 lb
Hyd. flow
6.8 gpm
Top speed
15.5–18.6 mph

Fiat 680 (DT) specs: key facts

  • The Fiat 680 (DT) was built from 1978 to 1984.

  • The Fiat 680 (DT) has a claimed engine power (gross or net not stated) of 50 kW (67 hp); it has no measured PTO figure.

  • The Fiat 680 (DT) was offered in two-wheel-drive and four-wheel-drive versions.

  • The Fiat 680 (DT) has a FIAT-IVECO 8045.02.270 (370) engine, a 4-cylinder 3.46 L diesel unit.

  • The Fiat 680 (DT) weighs 3,300 kg (7,275 lb) unladen.

  • The Fiat 680 (DT) has a rear PTO running at 540/1000 rpm.

  • The hydraulic pump of the Fiat 680 (DT) delivers 25.8 L/min (6.8 gpm).

Source · Traktorenlexikon, “Fiat 680 /680 DT”

How much horsepower does a 680 (DT) have?

The only figure for the 680 (DT) is 67 hp (50 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.

Engine, claimed (gross/net not stated)
67 hp

Source · Traktorenlexikon, “Fiat 680 /680 DT”

What engine is in a 680 (DT)?

A 680 (DT) has a FIAT-IVECO 8045.02.270 (370), a 4-cylinder 3.46 L diesel engine.

Engine — 680 (DT) engine specifications
Make & modelFIAT-IVECO 8045.02.270 (370)
Cylinders4, liquid-cooled
Displacement210.9 ci · 3.46 L
InjectionDirect injection with in-line injection pump and mechanical or hydraulic speed governor
Electrical system12 V

Source · Traktorenlexikon, “Fiat 680 /680 DT”

How much will a 680 (DT) lift, and what is its hydraulic flow?

Hydraulic and PTO specifications for the 680 (DT) are below.

Hydraulics & PTO — 680 (DT) hydraulics and PTO specifications
Pump flow6.8 gpm · 25.8 L/min
Pressure2,843 psi · 196 bar
Hitch categoryCategory 2
Rear PTO540/1000 rpm @ 2,227 engine rpm

Source · Traktorenlexikon, “Fiat 680 /680 DT”

What transmission does a 680 (DT) have?

Transmission specifications for the 680 (DT) are below.

Transmission — 680 (DT) transmission specifications
ClutchDry FERODO or LuK double clutch with separate PTO control
SteeringMechanically operated GEMMER steering
Top speed15.5–18.6 mph · 25–30 km/hthe article lists alternatives

Source · Traktorenlexikon, “Fiat 680 /680 DT”

How much does a 680 (DT) weigh?

A 680 (DT) weighs 7,275 lb (3,300 kg) unladen.

Weights & dimensions — 680 (DT) weights and dimensions
Unladen weight7,275 lb · 3,300 kgDT: 3,620
Wheelbase89.2 in · 2,265 mmDT: 2,275
Length138.1 in · 3,507 mmDT: 3,645
Width68.9 in · 1,750 mm
Height100.6 in · 2,555 mm
Ground clearance20.1 in · 511 mmDT: 460
Front track55.5–75.2 in · 1,410–1,910 mmDT: 1,600-1,925
Rear track55.1–78.7 in · 1,400–2,000 mm
Turning radius, braked11.2 ft · 3.40 mDT: 4,850

Source · Traktorenlexikon, “Fiat 680 /680 DT”

Which tractors compare with a 680 (DT)?

Within 10% of its 58.5 hp at the PTO (claimed), the same type, and first built within 15 years of it.

Everything else people ask

Is a 680 (DT) two-wheel drive or four-wheel drive?

The Fiat 680 (DT) was offered in two-wheel-drive and four-wheel-drive versions.

What PTO does a 680 (DT) have?

A 680 (DT) has a 540/1000 rpm rear PTO.

Where this page comes from

Compiled from Traktorenlexikon, “Fiat 680 /680 DT”.

Last verified

Not yet verified

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. Traktorenlexikon: Fiat 680 /680 DTCC BY-SA 4.0, WIKIBOOKS-TL-108508 · revision 1074854. Wikibooks contributors (Traktorenlexikon). Original document