Fiat 680 (DT) vs Leyland 272

12 material differences

Tractor one

Fiat 680 (DT)

1978–1984

No measured PTO figure

Tractor two

Leyland 272

1975–1980

No measured PTO figure

Which should you choose?

We will not advise between these two machines, because the drive differs (Two-wheel or four-wheel drive; 2WD). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.

Field by field

12 material differences · 2 fields identical or within 5%, which is not counted as material

Fiat 680 (DT) and Leyland 272, field by field
Field680 (DT)272Gap
Engine
Engine power, claimed claimed67 hp72.0 hp+7% 272
Engine declaredFIAT-IVECO 8045.02.270 (370)LEYLAND-MOTORS 4/98 NTdiffers
Displacement declared3.46 L3.77 L+9% 272
Maximum torque declared183 lb·ft · 248 N·m
Transmission
Top speed declared15.5–18.6 mph · 25–30 km/h18.6 mph · 30 km/hdiffers
Clutch declaredDry FERODO or LuK double clutch with separate PTO controlDry BORG & BECK double clutchdiffers
Hydraulics & hitch
Pump flow declared6.8 gpm · 25.8 L/min8.3 gpm · 31.6 L/min+22% 272
Pressure declared2,843 psi · 196 bar
Three-point lift at ends declared4,698 lb · 2,131 kg
Rear PTO speeds declared540/1000 rpm540 rpmdiffers
Weight & dimensions
Unladen weight declared7,275 lb · 3,300 kg6,684 lb · 3,032 kg+9% 680 (DT)
Wheelbase declared89.2 in · 2,265 mm80.0 in · 2,032 mm+11% 680 (DT)
Length declared138.1 in · 3,507 mm146.9 in · 3,730 mm+6% 272
Width declared68.9 in · 1,750 mm80.3 in · 2,040 mm+17% 272
Height declared100.6 in · 2,555 mm98.8 in · 2,510 mm
Ground clearance declared20.1 in · 511 mm15.8 in · 402 mm+27% 680 (DT)
Turning radius, braked declared11.2 ft · 3.40 m10.7 ft · 3.27 m
Fuel tank declared84.5 qt · 80.0 L72.1 qt · 68.2 L+17% 680 (DT)

Fiat 680 (DT) sources

Source
  • Source: Traktorenlexikon, “Fiat 680 /680 DT”

Leyland 272 sources

Source
  • Source: Traktorenlexikon, “Leyland 272”
  • Source: Traktorenlexikon, “Leyland 270”