• Rigid chassis
  • WhichTractor size: Compact
  • Not independently tested
  • 1989–1992

It sits on the compact/utility boundary, so either size is a fair description. It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category

Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is

Fiat 50-66 (DT) Full specifications

FIAT-IVECO 8035.06 three-cylinder diesel. The manufacturer claimed 49.3 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.

Engine power, claimed · gross or net not stated

49.3 hp

36.8 kW as stated by the source

Not independently tested

Claimed · standard not stated by the source

Source · Traktorenlexikon, “Fiat 50-66/50-66 DT”, claimed

Weight
4,255 lb
3-point lift
4,674 lb
Hyd. flow
8.7 gpm
Top speed
15.5–18.6 mph

Fiat 50-66 (DT) specs: key facts

  • The Fiat 50-66 (DT) was built from 1989 to 1992.

  • The Fiat 50-66 (DT) has a claimed engine power (gross or net not stated) of 36.8 kW (49.3 hp); it has no measured PTO figure.

  • The Fiat 50-66 (DT) was offered in two-wheel-drive and four-wheel-drive versions.

  • The Fiat 50-66 (DT) has a FIAT-IVECO 8035.06 engine, a 3-cylinder 2.71 L diesel unit.

  • The Fiat 50-66 (DT) weighs 1,930 kg (4,255 lb) unladen.

  • The Fiat 50-66 (DT) has an independent rear PTO running at 540/1000 rpm.

  • The three-point hitch of the Fiat 50-66 (DT) lifts 2,120 kg (4,674 lb) at the lower-link ends.

  • The hydraulic pump of the Fiat 50-66 (DT) delivers 32.8 L/min (8.7 gpm).

Source · Traktorenlexikon, “Fiat 50-66/50-66 DT”

How much horsepower does a 50-66 (DT) have?

The only figure for the 50-66 (DT) is 49.3 hp (36.8 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.

Engine, claimed (gross/net not stated)
49.3 hp

Source · Traktorenlexikon, “Fiat 50-66/50-66 DT”

What engine is in a 50-66 (DT)?

A 50-66 (DT) has a FIAT-IVECO 8035.06, a 3-cylinder 2.71 L diesel engine.

Engine — 50-66 (DT) engine specifications
Make & modelFIAT-IVECO 8035.06
Cylinders3, liquid-cooled
Displacement165.4 ci · 2.71 L
Max torque114 lb·ft · 155 N·m @ 1,200 rpm
Injectiondirect injection

Source · Traktorenlexikon, “Fiat 50-66/50-66 DT”

How much will a 50-66 (DT) lift, and what is its hydraulic flow?

A 50-66 (DT) lifts 4,674 lb (2,120 kg) at the lower-link ends of its Category 2 three-point hitch.

Hydraulics & PTO — 50-66 (DT) hydraulics and PTO specifications
Pump flow8.7 gpm · 32.8 L/min
Pressure3,118 psi · 215 bar
Hitch categoryCategory 2
Lift at ends4,674 lb · 2,120 kg
Rear PTOIndependent, engine-driven, 540/1000 rpm @ 2,199 engine rpmEngages under loadGround-speed PTO available
PTO shaft1 3/8"- 6 splines or 1 3/8"- 21 parts

Source · Traktorenlexikon, “Fiat 50-66/50-66 DT”

What transmission does a 50-66 (DT) have?

Transmission specifications for the 50-66 (DT) are below.

Transmission — 50-66 (DT) transmission specifications
Clutchdry Valeo or LuK double clutch
Steeringhydrostatic Danfoss steering with double-acting steering cylinder
Top speed15.5–18.6 mph · 25–30 km/hthe article lists alternatives

Source · Traktorenlexikon, “Fiat 50-66/50-66 DT”

How much does a 50-66 (DT) weigh?

A 50-66 (DT) weighs 4,255 lb (1,930 kg) unladen.

Weights & dimensions — 50-66 (DT) weights and dimensions
Unladen weight4,255 lb · 1,930 kgDT: 2,150
Maximum permissible mass8,488 lb · 3,850 kg
Wheelbase78.7 in · 1,999 mmDT: 1,902
Length127.6 in · 3,241 mm
Width60.6 in · 1,540 mm
Height89.4 in · 2,270 mm
Ground clearance14.8 in · 375 mmDT: 310
Front track51.2–70.9 in · 1,300–1,800 mmDT: 1,380-1,820
Rear track50.0–60.2 in · 1,270–1,530 mm
Turning radius, braked9.9 ft · 3.03 mDT: 3,580

Source · Traktorenlexikon, “Fiat 50-66/50-66 DT”

Which tractors compare with a 50-66 (DT)?

Within 10% of its 49.3 hp of claimed engine power, the same type, and first built within 15 years of it.

Everything else people ask

Is a 50-66 (DT) two-wheel drive or four-wheel drive?

The Fiat 50-66 (DT) was offered in two-wheel-drive and four-wheel-drive versions.

What PTO does a 50-66 (DT) have?

A 50-66 (DT) has a independent 540/1000 rpm rear PTO on a 1 3/8"- 6 splines or 1 3/8"- 21 parts shaft.

Where this page comes from

Compiled from Traktorenlexikon, “Fiat 50-66/50-66 DT”.

Last verified

Not yet verified

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. Traktorenlexikon: Fiat 50-66/50-66 DTCC BY-SA 4.0, WIKIBOOKS-TL-108639 · revision 1075412. Wikibooks contributors (Traktorenlexikon). Original document