- Rigid chassis
- WhichTractor size: Compact
- Not independently tested
- 1989–1992
It sits on the compact/utility boundary, so either size is a fair description. It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category
Fiat 50-66 (DT) Hydraulics & PTO specifications
17 hydraulics and PTO values on record for the 50-66 (DT).
Engine power, claimed · gross or net not stated
49.3 hp
36.8 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Fiat 50-66/50-66 DT”, claimed
How much will a 50-66 (DT) lift?
A 50-66 (DT) lifts 4,674 lb (2,120 kg) at the lower-link ends.
| Pump flow | 8.7 gpm · 32.8 L/min |
|---|---|
| Steering pump flow | 5.0 gpm · 19.1 L/min |
| Hydraulic pressure | 3,118 psi · 215 bar |
| Rear remote valves | 3 |
| Three-point hitch category | Category 2 |
| Lift capacity at ball ends | 4,674 lb · 2,120 kg |
| Lift capacity 610 mm behind ends | 3,594 lb · 1,630 kg |
| Hitch control | lifting, lowering, floating position, draft, mixed and position control |
| Front hitch available, optional | Yes |
Source · Traktorenlexikon, “Fiat 50-66/50-66 DT”
What PTO does a 50-66 (DT) have?
A 50-66 (DT) has a 540/1000 rpm rear PTO.
| Rear PTO drive | Engine-driven |
|---|---|
| Ground-speed PTO | Yes |
| Rear PTO independence | Independent |
| PTO engages under load | Yes |
| Rear PTO speeds | 540/1000 rpm |
| Engine speed at 540 PTO | 2,199 rpm |
| Rear PTO shaft | 1 3/8"- 6 splines or 1 3/8"- 21 parts |
| Front PTO available, optional | Yes |
Source · Traktorenlexikon, “Fiat 50-66/50-66 DT”
Where this page comes from
17 hydraulics and PTO values from Traktorenlexikon, “Fiat 50-66/50-66 DT”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Fiat 50-66/50-66 DT — CC BY-SA 4.0, WIKIBOOKS-TL-108639 · revision 1075412. Wikibooks contributors (Traktorenlexikon). Original document