- Rigid chassis
- WhichTractor size: Utility
- Not independently tested
- 1970–1977
WhichTractor size, not the maker’s category
Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is
Fiat 450/N (DT) Full specifications
FIAT-IVECO 8035.01.300 three-cylinder diesel. The manufacturer claimed 42.4 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.
Engine power, claimed · gross or net not stated
42.4 hp
31.6 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Fiat 450-N/450-N DT”, claimed
- Weight
- 3,748 lb
- 3-point lift
- 2,866 lb
- Hyd. flow
- 5.8 gpm
- Top speed
- 16.8 mph
Fiat 450/N (DT) specs: key facts
The Fiat 450/N (DT) was built from 1970 to 1977.
The Fiat 450/N (DT) has a claimed engine power (gross or net not stated) of 31.6 kW (42.4 hp); it has no measured PTO figure.
The Fiat 450/N (DT) was offered in two-wheel-drive and four-wheel-drive versions.
The Fiat 450/N (DT) has a FIAT-IVECO 8035.01.300 engine, a 3-cylinder 2.34 L diesel unit.Source 2
The Fiat 450/N (DT) weighs 1,700 kg (3,748 lb) unladen.
The Fiat 450/N (DT) has a rear PTO running at 540 rpm.
The three-point hitch of the Fiat 450/N (DT) lifts 1,300 kg (2,866 lb) at the lower-link ends.
The hydraulic pump of the Fiat 450/N (DT) delivers 21.8 L/min (5.8 gpm).
Source · Traktorenlexikon, “Fiat 450-N/450-N DT”
How much horsepower does a 450/N (DT) have?
The only figure for the 450/N (DT) is 42.4 hp (31.6 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.
Source · Traktorenlexikon, “Fiat 450-N/450-N DT”
What engine is in a 450/N (DT)?
A 450/N (DT) has a FIAT-IVECO 8035.01.300, a 3-cylinder 2.34 L diesel engine.
| Make & model | FIAT-IVECO 8035.01.300Source 2 |
|---|---|
| Cylinders | 3, liquid-cooledSource 2 |
| Displacement | 142.7 ci · 2.34 LSource 2 |
| Max torque | 103 lb·ft · 140 N·m @ 1,400 rpm |
| Electrical system | 12 V |
Source · Traktorenlexikon, “Fiat 450-N/450-N DT”
How much will a 450/N (DT) lift, and what is its hydraulic flow?
A 450/N (DT) lifts 2,866 lb (1,300 kg) at the lower-link ends of its Category 1 three-point hitch.
| Pump flow | 5.8 gpm · 21.8 L/min |
|---|---|
| Pressure | 2,843 psi · 196 bar |
| Hitch category | Category 1 |
| Lift at ends | 2,866 lb · 1,300 kg |
| Rear PTO | 540 rpm @ 1,966 engine rpm |
Source · Traktorenlexikon, “Fiat 450-N/450-N DT”
What transmission does a 450/N (DT) have?
Transmission specifications for the 450/N (DT) are below.
| Steering | Mechanically operated GEMMER steering |
|---|---|
| Top speed | 16.8 mph · 27 km/h |
Source · Traktorenlexikon, “Fiat 450-N/450-N DT”
How much does a 450/N (DT) weigh?
A 450/N (DT) weighs 3,748 lb (1,700 kg) unladen.
| Unladen weight | 3,748 lb · 1,700 kgDT: 1,830 |
|---|---|
| Wheelbase | 75.6 in · 1,920 mmDT: 1,870 |
| Length | 126.0 in · 3,200 mm |
| Width | 62.4 in · 1,585 mm |
| Height | 67.5 in · 1,715 mm |
| Ground clearance | 14.6 in · 370 mmDT: 320 |
| Front track | 50.4–78.0 in · 1,280–1,980 mmDT: 1,400 |
| Rear track | 47.2–74.8 in · 1,200–1,900 mm |
| Turning radius, braked | 9.7 ft · 2.95 m |
Source · Traktorenlexikon, “Fiat 450-N/450-N DT”
Which tractors compare with a 450/N (DT)?
Within 10% of its 36.3 hp at the PTO (claimed), the same type, and first built within 15 years of it.
- SOMECA 450-N (DT)36.3 hp PTO, claimed · 1970–1977Side by side with the 450/N (DT) →
- OLIVER 1250-A (4 WD)36.3 hp PTO, claimed · 1969Side by side with the 450/N (DT) →
- OLIVER 1255 (4 WD)36.3 hp PTO, claimed · 1969–1971Side by side with the 450/N (DT) →
- UZINA TRACTORUL R-450 (DT)36.3 hp PTO, claimed · 1974–1981Side by side with the 450/N (DT) →
- International Harvester D-43636.4 hp PTO, claimed · 1959–1962Side by side with the 450/N (DT) →
- Hürlimann H-345 (A)36.2 hp PTO, claimed · 1982–1986Side by side with the 450/N (DT) →
Everything else people ask
Is a 450/N (DT) two-wheel drive or four-wheel drive?
The Fiat 450/N (DT) was offered in two-wheel-drive and four-wheel-drive versions.
What PTO does a 450/N (DT) have?
A 450/N (DT) has a 540 rpm rear PTO.
Where this page comes from
Compiled from Traktorenlexikon, “Someca 450 N”; and Traktorenlexikon, “Fiat 450-N/450-N DT”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Fiat 450-N/450-N DT — CC BY-SA 4.0, WIKIBOOKS-TL-121804 · revision 1073893. Wikibooks contributors (Traktorenlexikon). Original document
- Traktorenlexikon: Someca 450 N — CC BY-SA 4.0, WIKIBOOKS-TL-121221 · revision 1067845. Wikibooks contributors (Traktorenlexikon). Original document