0 material differences · fewer than 12

Tractor oneFiat 450/N (DT)1970–1977No measured PTO figureTractor twoSOMECA 450-N (DT)1970–1977No measured PTO figure

Which should you choose?

Read our verdict on the 450/N (DT) and the 450-N (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

0 material differences · 17 fields identical or within 5%, which is not counted as material

Fiat 450/N (DT) and SOMECA 450-N (DT), field by field
Field	450/N (DT)	450-N (DT)	Gap
Engine
Engine power, claimed claimed	42.4 hp	42.4 hp	—
Engine declared	FIAT-IVECO 8035.01.300	FIAT-IVECO 8035.01.300	—
Displacement declared	2.34 L	2.34 L	—
Maximum torque declared	103 lb·ft · 140 N·m	103 lb·ft · 140 N·m	—
Transmission
Top speed declared	16.8 mph · 27 km/h	16.8 mph · 27 km/h	—
Clutch declared	—	Pedal-operated two-stage dry FERODO double clutch	—
Hydraulics & hitch
Pump flow declared	5.8 gpm · 21.8 L/min	5.8 gpm · 21.8 L/min	—
Pressure declared	2,843 psi · 196 bar	2,843 psi · 196 bar	—
Three-point lift, at the coupling points declared	2,866 lb · 1,300 kg	2,866 lb · 1,300 kg	—
Rear PTO speeds declared	540 rpm	540 rpm	—
Weight & dimensions
Unladen weight declared	3,748 lb · 1,700 kg	3,748 lb · 1,700 kg	—
Wheelbase declared	75.6 in · 1,920 mm	75.6 in · 1,920 mm	—
Length declared	126.0 in · 3,200 mm	126.0 in · 3,200 mm	—
Width declared	62.4–88.2 in · 1,585–2,240 mm	62.4–88.2 in · 1,585–2,240 mm	—
Height, over the exhaust declared	67.5 in · 1,715 mm	67.5 in · 1,715 mm	—
Ground clearance declared	14.6 in · 370 mm	14.6 in · 370 mm	—
Turning radius, braked declared	9.7 ft · 2.95 m	9.7 ft · 2.95 m	—
Fuel tank declared	57.1 qt · 54.0 L	57.1 qt · 54.0 L	—

Source

Source