- Rigid chassis
- WhichTractor size: Utility
- Not independently tested
- 1968–1974
It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category
Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is
Fiat 400 (DT) Full specifications
FIAT-IVECO 8035.01.201 three-cylinder diesel. The manufacturer claimed 34.5 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.
Engine power, claimed · gross or net not stated
34.5 hp
25.7 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Fiat 400/400 DT”, claimed
- Weight
- 3,750 lb
- 3-point lift
- 2,866 lb
- Hyd. flow
- 5.8 gpm
- Top speed
- 15.5 mph
Fiat 400 (DT) specs: key facts
The Fiat 400 (DT) was built from 1968 to 1974.
The Fiat 400 (DT) has a claimed engine power (gross or net not stated) of 25.7 kW (34.5 hp); it has no measured PTO figure.
The Fiat 400 (DT) was offered in two-wheel-drive and four-wheel-drive versions.
The Fiat 400 (DT) has a FIAT-IVECO 8035.01.201 engine, a 3-cylinder 2.34 L diesel unit.
The Fiat 400 (DT) weighs 1,701 kg (3,750 lb) unladen.
The Fiat 400 (DT) has an independent rear PTO running at 540 rpm.
The three-point hitch of the Fiat 400 (DT) lifts 1,300 kg (2,866 lb) at the lower-link ends.
The hydraulic pump of the Fiat 400 (DT) delivers 21.8 L/min (5.8 gpm).
Source · Traktorenlexikon, “Fiat 400/400 DT”
How much horsepower does a 400 (DT) have?
The only figure for the 400 (DT) is 34.5 hp (25.7 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.
Source · Traktorenlexikon, “Fiat 400/400 DT”
What engine is in a 400 (DT)?
A 400 (DT) has a FIAT-IVECO 8035.01.201, a 3-cylinder 2.34 L diesel engine.
| Make & model | FIAT-IVECO 8035.01.201 |
|---|---|
| Cylinders | 3, liquid-cooled |
| Displacement | 142.7 ci · 2.34 L |
| Max torque | 103 lb·ft · 140 N·m @ 1,400 rpm |
| Injection | Direct injection |
| Electrical system | 12 V |
Source · Traktorenlexikon, “Fiat 400/400 DT”
How much will a 400 (DT) lift, and what is its hydraulic flow?
A 400 (DT) lifts 2,866 lb (1,300 kg) at the lower-link ends of its Category 1 three-point hitch.
| Pump flow | 5.8 gpm · 21.8 L/min |
|---|---|
| Pressure | 2,843 psi · 196 bar |
| Hitch category | Category 1 |
| Lift at ends | 2,866 lb · 1,300 kg |
| Rear PTO | Independent, engine-driven, 540 rpm @ 1,966 engine rpmGround-speed PTO available |
| PTO shaft | 1 3/8"- 6 splines |
Source · Traktorenlexikon, “Fiat 400/400 DT”
What transmission does a 400 (DT) have?
Transmission specifications for the 400 (DT) are below.
| Clutch | Pedal-operated two-stage dry Feredo double clutch |
|---|---|
| Steering | Mechanical GEMMER steering |
| Top speed | 15.5 mph · 25 km/h |
Source · Traktorenlexikon, “Fiat 400/400 DT”
How much does a 400 (DT) weigh?
A 400 (DT) weighs 3,750 lb (1,701 kg) unladen.
| Unladen weight | 3,750 lb · 1,701 kgDT: 1,830 |
|---|---|
| Wheelbase | 75.6 in · 1,920 mmDT: 1,870 |
| Length | 124.8 in · 3,169 mm |
| Width | 62.4 in · 1,585 mm |
| Height | 67.5 in · 1,715 mm |
| Ground clearance | 14.6 in · 370 mmDT: 320 |
| Front track | 50.4–78.0 in · 1,280–1,980 mmDT: 1,400 |
| Rear track | 47.2–74.8 in · 1,200–1,900 mm |
| Turning radius, braked | 9.7 ft · 2.95 mDT: 3,900 |
Source · Traktorenlexikon, “Fiat 400/400 DT”
Which tractors compare with a 400 (DT)?
Within 10% of its 34.5 hp of claimed engine power, the same type, and first built within 15 years of it.
- ZETOR 3511/354534.5 hp engine, claimed · 1967–1972Side by side with the 400 (DT) →
- International Harvester F-267 D34.5 hp engine, claimed · 1961Side by side with the 400 (DT) →
- International Harvester FU-267 D34.5 hp engine, claimed · 1961Side by side with the 400 (DT) →
- SOMECA SOM-30 B34.5 hp engine, claimed · 1960–1963Side by side with the 400 (DT) →
- International Harvester FU-265 D34.5 hp engine, claimed · 1959–1961Side by side with the 400 (DT) →
- UTB U-36034.5 hp engine, claimed · 1977–1991Side by side with the 400 (DT) →
Everything else people ask
Is a 400 (DT) two-wheel drive or four-wheel drive?
The Fiat 400 (DT) was offered in two-wheel-drive and four-wheel-drive versions.
What PTO does a 400 (DT) have?
A 400 (DT) has a independent 540 rpm rear PTO on a 1 3/8"- 6 splines shaft.
Where this page comes from
Compiled from Traktorenlexikon, “Fiat 400/400 DT”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Fiat 400/400 DT — CC BY-SA 4.0, WIKIBOOKS-TL-84414 · revision 1073702. Wikibooks contributors (Traktorenlexikon). Original document