- Rigid chassis
- WhichTractor size: Utility
- No lab test on file
- 1961
It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category
Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is
International Harvester FU-267D specs: hp, weight, years
INTERNATIONAL HARVESTER FD-136 M four-cylinder diesel. The manufacturer claimed 34.5 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.
Engine power, claimed · gross or net not stated
34.5 hp
25.7 kW as stated by the source
No lab test on file
Claimed · standard not stated by the source
Source · Traktorenlexikon, “McCormick FU-267 D”, claimed
This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.
- Weight
- 4,012 lb
- Hyd. flow
- 4.9 gpm
- Top speed
- 11.8 mph
International Harvester FU-267D specs: key facts
The International Harvester FU-267D was built in 1961.
The International Harvester FU-267D has a claimed engine power (gross or net not stated) of 25.7 kW (34.5 hp); it has no measured PTO figure.
The International Harvester FU-267D is two-wheel drive (2WD).
The International Harvester FU-267D has a INTERNATIONAL HARVESTER FD-136 M engine, a 4-cylinder 2.23 L diesel unit.Source 1
The International Harvester FU-267D weighs 1,820 kg (4,012 lb) unladen.
The International Harvester FU-267D has an independent rear PTO running at 549 rpm.
The hydraulic pump of the International Harvester FU-267D delivers 18.6 L/min (4.9 gpm).
Source · Traktorenlexikon, “McCormick FU-267 D”
How much horsepower does a FU-267D have?
The only figure for the FU-267D is 34.5 hp (25.7 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.
Source · Traktorenlexikon, “McCormick FU-267 D”
What engine is in a FU-267D?
A FU-267D has an INTERNATIONAL HARVESTER FD-136 M, a 4-cylinder 2.23 L diesel engine.
| Make & model | INTERNATIONAL HARVESTER FD-136 M |
|---|---|
| Cylinders | 4, liquid-cooledSource 2 |
| Displacement | 136.0 ci · 2.23 L |
| Max torque | 100 lb·ft · 135 N·m @ 1,200 rpmSource 2 |
Source · Traktorenlexikon, “McCormick F-267 D”
How much will a FU-267D lift, and what is its hydraulic flow?
Hydraulic and PTO specifications for the FU-267D are below.
| Pump flow | 4.9 gpm · 18.6 L/min |
|---|---|
| Rear PTO | Independent, engine-driven, 549 rpm |
Source · Traktorenlexikon, “McCormick FU-267 D”
What transmission does a FU-267D have?
Transmission specifications for the FU-267D are below.
| Steering | mechanical GEMMER steering |
|---|---|
| Top speed | 11.8 mph · 19 km/h |
Source · Traktorenlexikon, “McCormick FU-267 D”
How much does a FU-267D weigh?
A FU-267D weighs 4,012 lb (1,820 kg) unladen.
| Unladen weight | 4,012 lb · 1,820 kg |
|---|---|
| Wheelbase | 70.1 in · 1,780 mm |
| Length | 122.0 in · 3,100 mm |
| Width | 81.9 in · 2,080 mm |
| Height | 66.9 in · 1,700 mm |
| Ground clearance | 13.8 in · 350 mm |
| Front track | 50.4–75.6 in · 1,280–1,920 mm |
| Rear track | 51.2–70.1 in · 1,300–1,780 mm |
| Turning radius, braked | 8.6 ft · 2.62 m |
Source · Traktorenlexikon, “McCormick FU-267 D”
What oil does a FU-267D take, and how much?
A FU-267D engine takes 7.4 qt (7.0 L). Single source, not independently verified — always confirm against the operator’s manual for your machine.
| System | Capacity |
|---|---|
| Engine oil | 7.4 qt · 7.0 LSource: Traktorenlexikon, “McCormick FU-267 D” · single source, not independently verified |
| Transmission | 37.5 qt · 35.5 LSource: Traktorenlexikon, “McCormick FU-267 D” · single source, not independently verified |
| Hydraulic | 13.9 qt · 13.2 LSource: Traktorenlexikon, “McCormick FU-267 D” · single source, not independently verified |
| Cooling system | 12.9 qt · 12.25 LSource: Traktorenlexikon, “McCormick FU-267 D” · single source, not independently verified |
Always confirm against the operator’s manual for your machine before service.
Which tractors compare with a FU-267D?
Within 10% of its 34.5 hp of claimed engine power, the same type, and first built within 15 years of it.
- International Harvester F-267D34.5 hp engine, claimed · 1961Side by side with the FU-267D →
- SOMECA SOM-30B34.5 hp engine, claimed · 1960–1963Side by side with the FU-267D →
- Warchalowski WT-3834.5 hp engine, claimed · 1962–1963Side by side with the FU-267D →
- Warchalowski WT-38B34.5 hp engine, claimed · 1962–1966Side by side with the FU-267D →
- IMT 53334.5 hp engine, claimed · 1959–1988Side by side with the FU-267D →
- International Harvester FU-265D34.5 hp engine, claimed · 1959–1961Side by side with the FU-267D →
Common questions about the International Harvester FU-267D
Is a FU-267D two-wheel drive or four-wheel drive?
The International Harvester FU-267D is two-wheel drive (2WD).
What PTO does a FU-267D have?
A FU-267D has a independent 549 rpm rear PTO.
Sources and how this page was built
Compiled from Traktorenlexikon, “McCormick F-267 D”; and Traktorenlexikon, “McCormick FU-267 D”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: McCormick F-267 D — CC BY-SA 4.0, WIKIBOOKS-TL-117860 · revision 1020372. Wikibooks contributors (Traktorenlexikon). Original document
- Traktorenlexikon: McCormick FU-267 D — CC BY-SA 4.0, WIKIBOOKS-TL-117861 · revision 1020373. Wikibooks contributors (Traktorenlexikon). Original document