• Vehicle type: unspecified
  • Rigid chassis
  • WhichTractor size: Standard-size
  • Not independently tested
  • 1952–1954
  • 184 built

WhichTractor size, not the maker’s category

We looked and the record does not say what this machine is. How we decide what a machine is

Fahr D 45 L Full specifications

KHD F3L 514 three-cylinder diesel. The manufacturer claimed 44.4 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.

Engine power, claimed · gross or net not stated

44.4 hp

33.1 kW as stated by the source

Not independently tested

Claimed · standard not stated by the source

Source · Traktorenlexikon, “Fahr D 45 L”, claimed

Weight
5,335 lb
Hyd. flow
4.9 gpm
Top speed
13.0–18.6 mph

Fahr D 45 L specs: key facts

  • The Fahr D 45 L was built from 1952 to 1954.

  • The Fahr D 45 L has a claimed engine power (gross or net not stated) of 33.1 kW (44.4 hp); it has no measured PTO figure.

  • The Fahr D 45 L is two-wheel drive (2WD).

  • The Fahr D 45 L has a KHD F3L 514 engine, a 3-cylinder 3.99 L diesel unit.

  • The Fahr D 45 L weighs 2,420 kg (5,335 lb) unladen.

  • The Fahr D 45 L has a dependent rear PTO running at 587 rpm.

  • The hydraulic pump of the Fahr D 45 L delivers 18.5 L/min (4.9 gpm).

Source · Traktorenlexikon, “Fahr D 45 L”

Fahr D 45 L tractor
Photo: BulldozerD11, CC BY-SA 3.0 via Wikimedia Commons · Wrong photo?

How much horsepower does a D 45 L have?

The only figure for the D 45 L is 44.4 hp (33.1 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.

Engine, claimed (gross/net not stated)
44.4 hp

Source · Traktorenlexikon, “Fahr D 45 L”

What engine is in a D 45 L?

A D 45 L has a KHD F3L 514, a 3-cylinder 3.99 L diesel engine.

Engine — D 45 L engine specifications
Make & modelKHD F3L 514
Cylinders3, air-cooled
Displacement243.5 ci · 3.99 L
Max torque164 lb·ft · 223 N·m

Source · Traktorenlexikon, “Fahr D 45 L”

How much will a D 45 L lift, and what is its hydraulic flow?

Hydraulic and PTO specifications for the D 45 L are below.

Hydraulics & PTO — D 45 L hydraulics and PTO specifications
Pump flow4.9 gpm · 18.5 L/min
Pressure3,129 psi · 216 bar
Rear PTODependent, transmission-driven, 587 rpm

Source · Traktorenlexikon, “Fahr D 45 L”

What transmission does a D 45 L have?

Transmission specifications for the D 45 L are below.

Transmission — D 45 L transmission specifications
SteeringZF single-wheel steering, type: 682
Top speed13.0–18.6 mph · 21–30 km/hthe article lists alternatives

Source · Traktorenlexikon, “Fahr D 45 L”

How much does a D 45 L weigh?

A D 45 L weighs 5,335 lb (2,420 kg) unladen.

Weights & dimensions — D 45 L weights and dimensions
Unladen weight5,335 lb · 2,420 kg
Maximum permissible mass9,700 lb · 4,400 kg
Maximum front axle load3,968 lb · 1,800 kg
Maximum rear axle load5,952 lb · 2,700 kg
Wheelbase82.7 in · 2,100 mm
Length144.1 in · 3,660 mm
Width73.4 in · 1,865 mm
Height91.5 in · 2,325 mm
Ground clearance16.8 in · 427 mm
Front track59.1–74.8 in · 1,500–1,900 mm
Rear track59.1–69.0 in · 1,500–1,752 mm
Turning radius, braked12.0 ft · 3.65 m

Source · Traktorenlexikon, “Fahr D 45 L”

Which tractors compare with a D 45 L?

Within 10% of its 42.9 hp at the PTO (claimed), the same type, and first built within 15 years of it.

Everything else people ask

Is a D 45 L two-wheel drive or four-wheel drive?

The Fahr D 45 L is two-wheel drive (2WD).

What PTO does a D 45 L have?

A D 45 L has a dependent 587 rpm rear PTO.

Where this page comes from

Compiled from Traktorenlexikon, “Fahr D 45 L”.

Last verified

Not yet verified

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. Traktorenlexikon: Fahr D 45 LCC BY-SA 4.0, WIKIBOOKS-TL-43354 · revision 1078527. Wikibooks contributors (Traktorenlexikon). Original document