• Vehicle type: unspecified
  • Rigid chassis
  • WhichTractor size: Compact
  • No lab test on file
  • 1968–1978
  • 9,185 built

It sits on the compact/utility boundary, so either size is a fair description. WhichTractor size, not the maker’s category

We looked and the record does not say what this machine is. How we decide what a machine is

Deutz D 3006 specs: hp, weight, years

KHD F2L 912 two-cylinder diesel. The manufacturer claimed 30 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.

Engine power, claimed · gross or net not stated

30 hp

22 kW as stated by the source

No lab test on file

Claimed · standard not stated by the source

Source · Traktorenlexikon, “Deutz D 3006”, claimed

This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.

Weight
3,935 lb
Hyd. flow
7.1 gpm
Top speed
12.4 mph

Deutz D 3006 specs: key facts

  • The Deutz D 3006 was built from 1968 to 1978.

  • The Deutz D 3006 has a claimed engine power (gross or net not stated) of 22 kW (30 hp); it has no measured PTO figure.

  • The Deutz D 3006 is two-wheel drive (2WD).

  • The Deutz D 3006 has a KHD F2L 912 engine, a 2-cylinder 1.88 L diesel unit.Source 1

  • The Deutz D 3006 weighs 1,785 kg (3,935 lb) unladen.

  • The Deutz D 3006 has a rear PTO running at 540 rpm.

  • The hydraulic pump of the Deutz D 3006 delivers 26.8 L/min (7.1 gpm).

Source · Traktorenlexikon, “Deutz D 3006”

How does the Deutz D 3006 compare with its class?

  • Strength:

    A hydraulic pump flow of 26.8 L/min is high for its class — 60% above the median of 16.8 L/min across the 64 machines within 10% of its power that hold this figure.

  • Strength:

    A 70 L fuel tank is high for its class — 75% above the median of 40 L across the 108 machines within 10% of its power that hold this figure.

Derived by WhichTractor from 129 comparable records. How we work this out

Illustration of the 1968–1978 Deutz (KHD) D 3006, a 30 hp farm tractor, operator station not recorded — shown as an open platform, a drawing generated from its specification record
Illustration — not a photograph · operator station not recorded — shown as an open platform

How much horsepower does a Deutz D 3006 have?

The only figure for the Deutz D 3006 is 30 hp (22 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.

Engine, claimed (gross/net not stated)
30 hp

Source · Traktorenlexikon, “Deutz D 3006”

What engine is in a Deutz D 3006?

A Deutz D 3006 has a KHD F2L 912, a 2-cylinder 1.88 L diesel engine.

Engine — Deutz D 3006 engine specifications
Make & modelKHD F2L 912
Cylinders2, air-cooledSource 2
Displacement115.0 ci · 1.88 L
Max torque75 lb·ft · 101 N·m @ 1,650 rpmSource 2
Electrical system12 VSource 2

Source · Traktorenlexikon, “Deutz D 2506”

How much will a Deutz D 3006 lift, and what is its hydraulic flow?

Hydraulic and PTO specifications for the Deutz D 3006 are below.

Hydraulics & PTO — Deutz D 3006 hydraulics and PTO specifications
Pump flow7.1 gpm · 26.8 L/min
Pressure2,538 psi · 175 bar
Rear PTO540 rpm @ 2,070 engine rpm
PTO shaft29 x 34,9 x 8,7 mm (Form-A)

Source · Traktorenlexikon, “Deutz D 3006”

What transmission does a Deutz D 3006 have?

Transmission specifications for the Deutz D 3006 are below.

Transmission — Deutz D 3006 transmission specifications
Top speed12.4 mph · 20 km/hN) or 26(S

Source · Traktorenlexikon, “Deutz D 3006”

How much does a Deutz D 3006 weigh?

A Deutz D 3006 weighs 3,935 lb (1,785 kg) unladen.

Weights & dimensions — Deutz D 3006 weights and dimensions
Unladen weight3,935 lb · 1,785 kg
Maximum permissible mass6,614 lb · 3,000 kg
Maximum front axle load2,050 lb · 930 kg
Maximum rear axle load5,071 lb · 2,300 kg
Wheelbase73.4 in · 1,865 mm
Length131.5 in · 3,340 mm
Width63.0 in · 1,600 mm
Height63.0 in · 1,600 mm
Ground clearance16.1 in · 410 mm
Front track49.6–55.9 in · 1,260–1,420 mm
Rear track49.2–59.4 in · 1,250–1,510 mm
Turning radius, braked10.3 ft · 3.15 m

Source · Traktorenlexikon, “Deutz D 3006”

What oil does a Deutz D 3006 take, and how much?

A Deutz D 3006 engine takes 5.8 qt (5.5 L). Single source, not independently verified — always confirm against the operator’s manual for your machine.

Deutz D 3006 fluid capacities, grades and service intervals
SystemCapacity
Engine oil5.8 qt · 5.5 LSource: Traktorenlexikon, “Deutz D 3006” · single source, not independently verified
Transmission14.8 qt · 14 LSource: Traktorenlexikon, “Deutz D 3006” · single source, not independently verified
Hydraulic12.7 qt · 12 LSource: Traktorenlexikon, “Deutz D 3006” · single source, not independently verified

Always confirm against the operator’s manual for your machine before service.

Which tractors compare with a Deutz D 3006?

Within 10% of its 27.2 hp at the PTO as the maker claimed it, with no laboratory test on file, the same type, and first built within 15 years of it.

Common questions about the Deutz D 3006

Is a Deutz D 3006 two-wheel drive or four-wheel drive?

The Deutz D 3006 is two-wheel drive (2WD).

What PTO does a Deutz D 3006 have?

A Deutz D 3006 has a 540 rpm rear PTO on a 29 x 34,9 x 8,7 mm (Form-A) shaft.

Sources and how this page was built

Compiled from Traktorenlexikon, “Deutz D 2506”; and Traktorenlexikon, “Deutz D 3006”.

Sources checked

14 SEP 2026

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. Traktorenlexikon: Deutz D 2506 — CC BY-SA 4.0, WIKIBOOKS-TL-51745 · revision 1023761. Wikibooks contributors (Traktorenlexikon). Original document
  2. Traktorenlexikon: Deutz D 3006 — CC BY-SA 4.0, WIKIBOOKS-TL-51746 · revision 1001997. Wikibooks contributors (Traktorenlexikon). Original document