11 material differences · fewer than 12

Tractor oneDeutz (KHD) D 30061968–1978No measured PTO figureTractor twoMassey Ferguson MF 1301964–1972No measured PTO figure

Which should you choose?

We will not advise between these two machines, because their unladen weight differs by more than 25% (35%). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.

Field by field

11 material differences · 4 fields identical or within 5%, which is not counted as material

Deutz (KHD) D 3006 and Massey Ferguson MF 130, field by field
FieldD 3006MF 130Gap
Engine
Engine power, claimed claimed30 hp——
Engine declaredKHD F2L 912Perkins A 4.107differs
Displacement declared1.88 L1.75 L+7% D 3006
Maximum torque declared75 lb·ft · 101 N·m77 lb·ft · 104 N·m—
Transmission
Top speed declared12.4 mph · 20 km/h12.4 mph · 20 km/h—
Clutch declared—Pedal operated dry air-cooled MF double clutch—
Hydraulics & hitch
Pump flow declared7.1 gpm · 26.8 L/min3.4 gpm · 13.0 L/min+106% D 3006
Pressure declared2,538 psi · 175 bar2,062–2,276 psi · 142–157 bardiffers
Rear PTO speeds declared540 rpm540 rpm—
Weight & dimensions
Unladen weight declared3,935 lb · 1,785 kg2,910 lb · 1,320 kg+35% D 3006
Maximum permissible mass declared6,614 lb · 3,000 kg5,512 lb · 2,500 kg+20% D 3006
Wheelbase declared73.4 in · 1,865 mm72.0 in · 1,830 mm—
Length declared131.5 in · 3,340 mm112.2 in · 2,850 mm+17% D 3006
Width declared63.0 in · 1,600 mm67.3 in · 1,710 mm+7% MF 130
Ground clearance declared16.1 in · 410 mm13.4 in · 340 mm+21% D 3006
Turning radius, braked declared10.3 ft · 3.15 m9.0 ft · 2.75 m+15% D 3006
Fuel tank declared74.0 qt · 70 L47.6 qt · 45 L+56% D 3006

Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.

Deutz (KHD) D 3006 sources

Source
  • Source: Traktorenlexikon, “Deutz D 3006”
  • Source: Traktorenlexikon, “Deutz D 2506”

Massey Ferguson MF 130 sources

Source
  • Source: Traktorenlexikon, “Massey Ferguson MF 30”
  • Source: Traktorenlexikon, “Massey Ferguson MF 130 V”
  • Source: Traktorenlexikon, “Massey Ferguson MF 130”