- Rigid chassis
- WhichTractor size: Utility
- Not independently tested
- 1982–1983
WhichTractor size, not the maker’s category
Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is
Deutz-Fahr DX 86 Full specifications
KHD BF4L 913 T four-cylinder diesel. The manufacturer claimed 80 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.
Engine power, claimed · gross or net not stated
80 hp
60 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Deutz-Fahr DX 86”, claimed
- Weight
- 8,091 lb
- 3-point lift
- 8,378 lb
- Hyd. flow
- 10.5 gpm
- Top speed
- 18.6–24.9 mph
Deutz-Fahr DX 86 specs: key facts
The Deutz-Fahr DX 86 was built from 1982 to 1983.
The Deutz-Fahr DX 86 has a claimed engine power (gross or net not stated) of 60 kW (80 hp); it has no measured PTO figure.
The Deutz-Fahr DX 86 was built in two-wheel drive (2WD) and four-wheel drive (4WD) versions, depending on configuration.
The Deutz-Fahr DX 86 has a KHD BF4L 913 T engine, a 4-cylinder 4.09 L diesel unit.Source 1
The Deutz-Fahr DX 86 weighs 3,670 kg (8,091 lb) unladen.
The Deutz-Fahr DX 86 has an independent rear PTO running at 540/1000 rpm.
The three-point hitch of the Deutz-Fahr DX 86 lifts 3,800 kg (8,378 lb) at the lower-link ends.
The hydraulic pump of the Deutz-Fahr DX 86 delivers 39.6 L/min (10.5 gpm).
Source · Traktorenlexikon, “Deutz-Fahr DX 86”
How much horsepower does a DX 86 have?
The only figure for the DX 86 is 80 hp (60 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.
Source · Traktorenlexikon, “Deutz-Fahr DX 86”
What engine is in a DX 86?
A DX 86 has a KHD BF4L 913 T, a 4-cylinder 4.09 L diesel engine.
| Make & model | KHD BF4L 913 T |
|---|---|
| Cylinders | 4, air-cooledSource 2 |
| Displacement | 249.3 ci · 4.09 L |
| Max torque | 211 lb·ft · 286 N·m @ 1,600 rpmSource 2 |
| Electrical system | 12 VSource 2 |
Source · Traktorenlexikon, “Deutz-Fahr DX 4.50”
How much will a DX 86 lift, and what is its hydraulic flow?
A DX 86 lifts 8,378 lb (3,800 kg) at the lower-link ends.
| System | Open centre |
|---|---|
| Pump flow | 10.5 gpm · 39.6 L/min |
| Lift at ends | 8,378 lb · 3,800 kg |
| Rear PTO | Independent, engine-driven, 540/1000 rpmEngages under load |
Source · Traktorenlexikon, “Deutz-Fahr DX 86”
What transmission does a DX 86 have?
Transmission specifications for the DX 86 are below.
| Top speed | 18.6–24.9 mph · 30–40 km/hthe article lists alternatives |
|---|
Source · Traktorenlexikon, “Deutz-Fahr DX 86”
How much does a DX 86 weigh?
A DX 86 weighs 8,091 lb (3,670 kg) unladen.
| Unladen weight | 8,091 lb · 3,670 kgtwo-wheel-drive version |
|---|---|
| Maximum front axle load | 3,858 lb · 1,750 kg |
| Maximum rear axle load | 9,259 lb · 4,200 kg |
| Wheelbase | 91.7 in · 2,330 mmtwo-wheel-drive version |
| Length | 159.1 in · 4,040 mmtwo-wheel-drive version |
| Width | 90.6 in · 2,300 mm |
| Height | 105.1 in · 2,670 mm |
| Ground clearance | 20.9 in · 530 mmtwo-wheel-drive version |
| Front track | 63.0–78.7 in · 1,600–2,000 mmtwo-wheel-drive version |
| Rear track | 64.6 in · 1,640 mm |
Source · Traktorenlexikon, “Deutz-Fahr DX 86”
Which tractors compare with a DX 86?
Within 10% of its 74.0 hp at the PTO (claimed), the same type, and first built within 15 years of it.
- John Deere 5500 (A)74.0 hp PTO, claimed · 1995–1997Side by side with the DX 86 →
- John Deere 3120 (A)74.0 hp PTO, claimed · 1969–1972Side by side with the DX 86 →
- Landini 7800-Turbo (DT)74.2 hp PTO, claimed · 1987–2000Side by side with the DX 86 →
- Hürlimann H-481 XF73.8 hp PTO, claimed · 1992–2000Side by side with the DX 86 →
- Renault 90-34 TX73.6 hp PTO, claimed · 1988–1995Side by side with the DX 86 →
- Steyr 98073.6 hp PTO, claimed · 1974–1977Side by side with the DX 86 →
Everything else people ask
Is a DX 86 two-wheel drive or four-wheel drive?
The Deutz-Fahr DX 86 was built in two-wheel drive (2WD) and four-wheel drive (4WD) versions, depending on configuration.
What PTO does a DX 86 have?
A DX 86 has a independent 540/1000 rpm rear PTO.
Where this page comes from
Compiled from Traktorenlexikon, “Deutz-Fahr DX 4.50”; and Traktorenlexikon, “Deutz-Fahr DX 86”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Deutz-Fahr DX 4.50 — CC BY-SA 4.0, WIKIBOOKS-TL-68250 · revision 1089898. Wikibooks contributors (Traktorenlexikon). Original document
- Traktorenlexikon: Deutz-Fahr DX 86 — CC BY-SA 4.0, WIKIBOOKS-TL-87349 · revision 1024138. Wikibooks contributors (Traktorenlexikon). Original document