7 material differences · fewer than 12
Tractor oneDeutz-Fahr DX 861982–1983No measured PTO figureTractor twoSAME Leopard 85 Export (DT)1978–1982No measured PTO figure
Which should you choose?
Read our verdict on the DX 86 and the Leopard 85 Export (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
7 material differences · 6 fields identical or within 5%, which is not counted as material
| Field | DX 86 | Leopard 85 Export (DT) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 80 hp | 80.9 hp | — |
| Engine declared | KHD BF4L 913 T | SAME DA 1054 P | differs |
| Displacement declared | 4.09 L | 4.15 L | — |
| Maximum torque declared | 211 lb·ft · 286 N·m | 197 lb·ft · 267 N·m | +7% DX 86 |
| Transmission | |||
| Top speed declared | 18.6–24.9 mph · 30–40 km/h | 15.5 mph · 25 km/h | differs |
| Clutch declared | — | Pedal-operated dry SAME single-disc clutch with 320 mm disc diameter | — |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Open centre | — | — |
| Pump flow declared | 10.5 gpm · 39.6 L/min | — | — |
| Pressure declared | — | 2,973 psi · 205 bar | — |
| Three-point lift, at the coupling points declared | 8,378 lb · 3,800 kg | 9,330 lb · 4,232 kg | +11% Leopard 85 Export (DT) |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 8,091 lb · 3,670 kg | 7,606 lb · 3,450 kg | +6% DX 86 |
| Wheelbase declared | 91.7 in · 2,330 mm | 93.1 in · 2,365 mm | — |
| Length declared | 159.1 in · 4,040 mm | 153.9 in · 3,910 mm | — |
| Width declared | 90.6 in · 2,300 mm | 77.2–100.8 in · 1,960–2,560 mm | differs |
| Ground clearance declared | 20.9 in · 530 mm | 19.7 in · 500 mm | +6% DX 86 |
| Turning radius, braked declared | — | 11.8 ft · 3.60 m | — |
| Fuel tank declared | 126.8 qt · 120 L | 126.8 qt · 120.0 L | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Deutz-Fahr DX 86 sources
- Source: Traktorenlexikon, “Deutz-Fahr DX 86”
- Source: Traktorenlexikon, “Deutz-Fahr DX 4.50”
SAME Leopard 85 Export (DT) sources
- Source: Traktorenlexikon, “SAME Leopard 85”