- Rigid chassis
- WhichTractor size: Standard-size
- No lab test on file
- 1980–1983
It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category
Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is
Deutz-Fahr DX 120 specs: hp, weight, years
KHD F6L 913 six-cylinder diesel. The manufacturer claimed 108.0 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.
Engine power, claimed · gross or net not stated
108.0 hp
80.5 kW as stated by the source
No lab test on file
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Deutz-Fahr DX 120”, claimed
This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.
- Weight
- 9,789 lb
- 3-point lift
- 11,464 lb
- Hyd. flow
- 14.7 gpm
- Top speed
- 15.5–18.6 mph
Deutz-Fahr DX 120 specs: key facts
The Deutz-Fahr DX 120 was built from 1980 to 1983.
The Deutz-Fahr DX 120 has a claimed engine power (gross or net not stated) of 80.5 kW (108.0 hp); it has no measured PTO figure.
The Deutz-Fahr DX 120 was offered in two-wheel-drive and four-wheel-drive versions.
The Deutz-Fahr DX 120 has a KHD F6L 913 engine, a 6-cylinder 6.13 L diesel unit.
The Deutz-Fahr DX 120 weighs 4,440 kg (9,789 lb) unladen.
The Deutz-Fahr DX 120 has a rear PTO running at 540 rpm / 1000 rpm.
The three-point hitch of the Deutz-Fahr DX 120 lifts 5,200 kg (11,464 lb) at the lower-link ends.
The hydraulic pump of the Deutz-Fahr DX 120 delivers 55.7 L/min (14.7 gpm).
Source · Traktorenlexikon, “Deutz-Fahr DX 120”
How much horsepower does a DX 120 have?
The only figure for the DX 120 is 108.0 hp (80.5 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.
Source · Traktorenlexikon, “Deutz-Fahr DX 120”
What engine is in a DX 120?
A DX 120 has a KHD F6L 913, a 6-cylinder 6.13 L diesel engine.
| Make & model | KHD F6L 913 |
|---|---|
| Cylinders | 6, air-cooled |
| Displacement | 374.0 ci · 6.13 L |
| Max torque | 286 lb·ft · 388 N·m @ 1,606 rpm |
| Injection | Direct injection |
| Electrical system | 12 V |
Source · Traktorenlexikon, “Deutz-Fahr DX 120”
How much will a DX 120 lift, and what is its hydraulic flow?
A DX 120 lifts 11,464 lb (5,200 kg) at the lower-link ends.
| Pump flow | 14.7 gpm · 55.7 L/min |
|---|---|
| Pressure | 3,046–3,771 psi · 210–260 bar |
| Lift at ends | 11,464 lb · 5,200 kg |
| Rear PTO | 540 rpm / 1000 rpm |
Source · Traktorenlexikon, “Deutz-Fahr DX 120”
What transmission does a DX 120 have?
Transmission specifications for the DX 120 are below.
| Clutch | Independent dry double clutch |
|---|---|
| Brakes | Pedal operated hydraulic disc brake acting on differential side shafts |
| Steering | Hydrostatic ZF steering |
| Top speed | 15.5–18.6 mph · 25–30 km/hthe article lists alternatives |
Source · Traktorenlexikon, “Deutz-Fahr DX 120”
How much does a DX 120 weigh?
A DX 120 weighs 9,789 lb (4,440 kg) unladen.
| Unladen weight | 9,789 lb · 4,440 kgtwo-wheel-drive version |
|---|---|
| Wheelbase | 105.8 in · 2,688 mmtwo-wheel-drive version |
| Length | 176.8 in · 4,490 mm |
| Width | 90.7 in · 2,304 mm |
| Height | 109.4 in · 2,780 mm |
| Ground clearance | 23.2 in · 590 mmtwo-wheel-drive version |
| Front track | 62.8–86.5 in · 1,596–2,196 mmtwo-wheel-drive version |
| Rear track | 70.9–78.7 in · 1,800–2,000 mm |
Source · Traktorenlexikon, “Deutz-Fahr DX 120”
What oil does a DX 120 take, and how much?
A DX 120 engine takes 15.9 qt (15 L). Single source, not independently verified — always confirm against the operator’s manual for your machine.
| System | Capacity |
|---|---|
| Engine oil | 15.9 qt · 15 LSource: Traktorenlexikon, “Deutz-Fahr DX 120” · single source, not independently verified |
| Transmission | 42.3 qt · 40 LSource: Traktorenlexikon, “Deutz-Fahr DX 120” · single source, not independently verified |
Always confirm against the operator’s manual for your machine before service.
Which tractors compare with a DX 120?
Within 10% of its 108.0 hp of claimed engine power, the same type, and first built within 15 years of it.
- SAME Laser 110 (DT)107.5 hp engine, claimed · 1983–1996Side by side with the DX 120 →
- Hürlimann H-5110 (A)108.5 hp engine, claimed · 1979–1983Side by side with the DX 120 →
- Landini 12.500 (DT)108.5 hp engine, claimed · 1978–1990Side by side with the DX 120 →
- Hürlimann H-5116 T (A)108.5 hp engine, claimed · 1984–1989Side by side with the DX 120 →
- Lamborghini R-1106 (DT)108.5 hp engine, claimed · 1985–1996Side by side with the DX 120 →
- Case-IH 5140 Maxxum108.5 hp engine, claimed · 1989–1997Side by side with the DX 120 →
Common questions about the Deutz-Fahr DX 120
Is a DX 120 two-wheel drive or four-wheel drive?
The Deutz-Fahr DX 120 was offered in two-wheel-drive and four-wheel-drive versions.
What PTO does a DX 120 have?
A DX 120 has a 540 rpm / 1000 rpm rear PTO.
Sources and how this page was built
Compiled from Traktorenlexikon, “Deutz-Fahr DX 120”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Deutz-Fahr DX 120 — CC BY-SA 4.0, WIKIBOOKS-TL-59145 · revision 1089854. Wikibooks contributors (Traktorenlexikon). Original document