11 material differences · fewer than 12
Tractor oneDeutz-Fahr DX 1201980–1983No measured PTO figureTractor twoSAME Laser 110 (DT)1983–1996No measured PTO figure
Which should you choose?
Read our verdict on the DX 120 and the Laser 110 (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
11 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | DX 120 | Laser 110 (DT) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 108.0 hp | 107.5 hp | — |
| Engine declared | KHD F6L 913 | SAME 1006 P | differs |
| Displacement declared | 6.13 L | 5.66 L | +8% DX 120 |
| Maximum torque declared | 286 lb·ft · 388 N·m | 269 lb·ft · 365 N·m | +6% DX 120 |
| Transmission | |||
| Top speed declared | 15.5–18.6 mph · 25–30 km/h | 18.6 mph · 30 km/h | differs |
| Clutch declared | Independent dry double clutch | Pedal operated dry SAME single disc clutch | differs |
| Hydraulics & hitch | |||
| Hydraulic control declared | — | Load sensing | — |
| Pump flow declared | 14.7 gpm · 55.7 L/min | 16.9 gpm · 64.0 L/min | +15% Laser 110 (DT) |
| Pressure declared | 3,046–3,771 psi · 210–260 bar | — | — |
| Three-point lift, at the coupling points declared | 11,464 lb · 5,200 kg | 10,141 lb · 4,600 kg | +13% DX 120 |
| Rear PTO speeds declared | 540 rpm / 1000 rpm | 540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 9,789 lb · 4,440 kg | 9,568 lb · 4,340 kg | — |
| Wheelbase declared | 105.8 in · 2,688 mm | 108.9 in · 2,767 mm | — |
| Length declared | 176.8 in · 4,490 mm | 158.9 in · 4,035 mm | +11% DX 120 |
| Width declared | 90.7 in · 2,304 mm | 83.5–107.5 in · 2,120–2,730 mm | differs |
| Ground clearance declared | 23.2 in · 590 mm | 23.6 in · 600 mm | — |
| Turning radius, braked declared | — | 11.2 ft · 3.40 m | — |
| Fuel tank declared | 126.8 qt · 120 L | 137.4 qt · 130.0 L | +8% Laser 110 (DT) |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Deutz-Fahr DX 120 sources
- Source: Traktorenlexikon, “Deutz-Fahr DX 120”
SAME Laser 110 (DT) sources
- Source: Traktorenlexikon, “SAME Laser 110”