11 material differences · fewer than 12
Tractor oneDeutz-Fahr DX 1201980–1983No measured PTO figureTractor twoHürlimann H-5116 T (A)1984–1989No measured PTO figure
Which should you choose?
Read our verdict on the DX 120 and the H-5116 T (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
11 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | DX 120 | H-5116 T (A) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 108.0 hp | 108.5 hp | — |
| Engine declared | KHD F6L 913 | HÜRLIMANN H-1105/11-Turbo | differs |
| Displacement declared | 6.13 L | 5.70 L | +7% DX 120 |
| Maximum torque declared | 286 lb·ft · 388 N·m | 302 lb·ft · 410 N·m | +6% H-5116 T (A) |
| Transmission | |||
| Top speed declared | 15.5–18.6 mph · 25–30 km/h | 15.5–18.6 mph · 25–30 km/h | — |
| Clutch declared | Independent dry double clutch | Pedal operated dry single plate clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 14.7 gpm · 55.7 L/min | — | — |
| Pressure declared | 3,046–3,771 psi · 210–260 bar | — | — |
| Three-point lift, at the coupling points declared | 11,464 lb · 5,200 kg | 10,340 lb · 4,690 kg | +11% DX 120 |
| Rear PTO speeds declared | 540 rpm / 1000 rpm | 540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 9,789 lb · 4,440 kg | 9,259 lb · 4,200 kg | +6% DX 120 |
| Wheelbase declared | 105.8 in · 2,688 mm | 108.9 in · 2,767 mm | — |
| Length declared | 176.8 in · 4,490 mm | 166.6 in · 4,231 mm | +6% DX 120 |
| Width declared | 90.7 in · 2,304 mm | 83.5–108.3 in · 2,120–2,750 mm | differs |
| Ground clearance declared | 23.2 in · 590 mm | 26.0 in · 660 mm | +12% H-5116 T (A) |
| Turning radius, braked declared | — | 11.2 ft · 3.40 m | — |
| Fuel tank declared | 126.8 qt · 120 L | 137.4 qt · 130.0 L | +8% H-5116 T (A) |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Deutz-Fahr DX 120 sources
- Source: Traktorenlexikon, “Deutz-Fahr DX 120”
Hürlimann H-5116 T (A) sources
- Source: Traktorenlexikon, “Hürlimann H 5116 T”