- Rigid chassis
- WhichTractor size: Compact
- Not independently tested
- 1982–1988
It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category
Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is
Deutz-Fahr D 2807 Full specifications
KHD F2L 912 two-cylinder diesel. The manufacturer claimed 28 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.
Engine power, claimed · gross or net not stated
28 hp
21 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Deutz-Fahr D 2807”, claimed
- Weight
- 4,057 lb
- 3-point lift
- 4,189 lb
- Hyd. flow
- 9.2 gpm
- Top speed
- 15.5 mph
Deutz-Fahr D 2807 specs: key facts
The Deutz-Fahr D 2807 was built from 1982 to 1988.
The Deutz-Fahr D 2807 has a claimed engine power (gross or net not stated) of 21 kW (28 hp); it has no measured PTO figure.
The Deutz-Fahr D 2807 is two-wheel drive (2WD).
The Deutz-Fahr D 2807 has a KHD F2L 912 engine, a 2-cylinder 1.88 L diesel unit.Source 1
The Deutz-Fahr D 2807 weighs 1,840 kg (4,057 lb) unladen.
The Deutz-Fahr D 2807 has a rear PTO running at 540 rpm.
The three-point hitch of the Deutz-Fahr D 2807 lifts 1,900 kg (4,189 lb) at the lower-link ends.
The hydraulic pump of the Deutz-Fahr D 2807 delivers 35.0 L/min (9.2 gpm).
Source · Traktorenlexikon, “Deutz-Fahr D 2807”
How much horsepower does a D 2807 have?
The only figure for the D 2807 is 28 hp (21 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.
Source · Traktorenlexikon, “Deutz-Fahr D 2807”
What engine is in a D 2807?
A D 2807 has a KHD F2L 912, a 2-cylinder 1.88 L diesel engine.
| Make & model | KHD F2L 912 |
|---|---|
| Cylinders | 2, air-cooledSource 2 |
| Displacement | 115.0 ci · 1.88 L |
| Max torque | 76 lb·ft · 103 N·m @ 1,700 rpmSource 2 |
| Electrical system | 12 VSource 2 |
Source · Traktorenlexikon, “Deutz D 2506”
How much will a D 2807 lift, and what is its hydraulic flow?
A D 2807 lifts 4,189 lb (1,900 kg) at the lower-link ends of its Category 1 three-point hitch.
| Pump flow | 9.2 gpm · 35.0 L/min |
|---|---|
| Pressure | 2,538 psi · 175 bar |
| Hitch category | Category 1 |
| Lift at ends | 4,189 lb · 1,900 kg |
| Rear PTO | transmission-driven, 540 rpm @ 1,870 engine rpm |
| PTO shaft | 29 x 34,9 x 8,7 mm |
Source · Traktorenlexikon, “Deutz-Fahr D 2807”
What transmission does a D 2807 have?
Transmission specifications for the D 2807 are below.
| Steering | Mechanical ZF Gemmer steering |
|---|---|
| Top speed | 15.5 mph · 25 km/h |
Source · Traktorenlexikon, “Deutz-Fahr D 2807”
How much does a D 2807 weigh?
A D 2807 weighs 4,057 lb (1,840 kg) unladen.
| Unladen weight | 4,057 lb · 1,840 kg |
|---|---|
| Maximum permissible mass | 6,614 lb · 3,000 kg |
| Maximum front axle load | 2,976 lb · 1,350 kg |
| Maximum rear axle load | 5,071 lb · 2,300 kg |
| Wheelbase | 73.4 in · 1,865 mm |
| Length | 131.1 in · 3,330 mm |
| Width | 61.4 in · 1,560 mm |
| Height | 89.4 in · 2,270 mm |
| Ground clearance | 17.3 in · 440 mm |
| Front track | 50.8 in · 1,290 mm |
| Rear track | 49.2–68.9 in · 1,250–1,750 mm |
Source · Traktorenlexikon, “Deutz-Fahr D 2807”
Which tractors compare with a D 2807?
Within 10% of its 28 hp of claimed engine power, the same type, and first built within 15 years of it.
- WHITE 2-3227.6 hp engine, claimed · 1984–1986Side by side with the D 2807 →
- SOMECA 300 (TD)27.6 hp engine, claimed · 1972–1978Side by side with the D 2807 →
- Renault 5327.6 hp engine, claimed · 1967–1973Side by side with the D 2807 →
- UTB 302 Dtce-IF29.6 hp engine, claimed · 1980–1991Side by side with the D 2807 →
- UTB U-30026.7 hp engine, claimed · 1980–1991Side by side with the D 2807 →
- WHITE 2-3026.7 hp engine, claimed · 1979–1984Side by side with the D 2807 →
Everything else people ask
Is a D 2807 two-wheel drive or four-wheel drive?
The Deutz-Fahr D 2807 is two-wheel drive (2WD).
What PTO does a D 2807 have?
A D 2807 has a 540 rpm rear PTO on a 29 x 34,9 x 8,7 mm shaft.
Where this page comes from
Compiled from Traktorenlexikon, “Deutz D 2506”; and Traktorenlexikon, “Deutz-Fahr D 2807”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Deutz D 2506 — CC BY-SA 4.0, WIKIBOOKS-TL-51745 · revision 1023761. Wikibooks contributors (Traktorenlexikon). Original document
- Traktorenlexikon: Deutz-Fahr D 2807 — CC BY-SA 4.0, WIKIBOOKS-TL-87866 · revision 1082947. Wikibooks contributors (Traktorenlexikon). Original document