6 material differences · fewer than 12
Tractor oneDeutz-Fahr D 28071982–1988No measured PTO figureTractor twoUTB 302 Dtce-IF1980–1991No measured PTO figure
Which should you choose?
Read our verdict on the D 2807 and the 302 Dtce-IF → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
6 material differences · 6 fields identical or within 5%, which is not counted as material
| Field | D 2807 | 302 Dtce-IF | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 28 hp | 29.6 hp | — |
| Engine declared | KHD F2L 912 | UTB D-111.057 | differs |
| Displacement declared | 1.88 L | 1.80 L | — |
| Maximum torque declared | 76 lb·ft · 103 N·m | 82 lb·ft · 111 N·m | +8% 302 Dtce-IF |
| Transmission | |||
| Top speed declared | 15.5 mph · 25 km/h | 15.5 mph · 25 km/h | — |
| Clutch declared | — | Pedal-operated, dry two-stage double clutch | — |
| Hydraulics & hitch | |||
| Pump flow declared | 9.2 gpm · 35.0 L/min | 6.6 gpm · 25.0 L/min | +40% D 2807 |
| Pressure declared | 2,538 psi · 175 bar | — | — |
| Rear PTO speeds declared | 540 rpm | 540 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 4,057 lb · 1,840 kg | 6,118 lb · 2,775 kg | +51% 302 Dtce-IF |
| Maximum permissible mass declared | 6,614 lb · 3,000 kg | — | — |
| Wheelbase declared | 73.4 in · 1,865 mm | 70.9 in · 1,800 mm | — |
| Length declared | 131.1 in · 3,330 mm | 110.4 in · 2,805 mm | +19% D 2807 |
| Width declared | 61.4 in · 1,560 mm | 59.4 in · 1,510 mm | — |
| Ground clearance declared | 17.3 in · 440 mm | — | — |
| Fuel tank declared | 74.0 qt · 70 L | 57.1 qt · 54.0 L | +30% D 2807 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Deutz-Fahr D 2807 sources
- Source: Traktorenlexikon, “Deutz-Fahr D 2807”
- Source: Traktorenlexikon, “Deutz D 2506”
UTB 302 Dtce-IF sources
- Source: Traktorenlexikon, “UTB U 302 DTCE IF”