- Vehicle type: unspecified
- Rigid chassis
- WhichTractor size: Utility
- No lab test on file
- 1992–1996
It sits on the compact/utility boundary, so either size is a fair description. It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category
We looked and the record does not say what this machine is. How we decide what a machine is
Deutz-Fahr Agrocompact 3.30 V/F specs: hp, weight, years
KHD F3L 912 three-cylinder diesel. The manufacturer claimed 53.2 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.
Engine power, claimed · gross or net not stated
53.2 hp
39.7 kW as stated by the source
No lab test on file
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Deutz-Fahr AgroCompact 3.30”, claimed
This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.
- Weight
- 4,740–5,181 lb
- 3-point lift
- 4,850 lb
- Top speed
- 21.7–24.9 mph
Deutz-Fahr Agrocompact 3.30 V/F specs: key facts
The Deutz-Fahr Agrocompact 3.30 V/F was built from 1992 to 1996.
The Deutz-Fahr Agrocompact 3.30 V/F has a claimed engine power (gross or net not stated) of 39.7 kW (53.2 hp); it has no measured PTO figure.
The Deutz-Fahr Agrocompact 3.30 V/F was offered in two-wheel-drive and four-wheel-drive versions.
The Deutz-Fahr Agrocompact 3.30 V/F has a KHD F3L 912 engine, a 3-cylinder 2.83 L diesel unit.Source 1
The Deutz-Fahr Agrocompact 3.30 V/F weighs 2,150–2,350 kg (4,740–5,181 lb) unladen.
The Deutz-Fahr Agrocompact 3.30 V/F has an independent rear PTO running at 540 rpm / 1000 rpm.
The three-point hitch of the Deutz-Fahr Agrocompact 3.30 V/F lifts 2,200.000 kg (4,850 lb) at the lower-link ends.
Source · Traktorenlexikon, “Deutz-Fahr AgroCompact 3.30”
How much horsepower does an Agrocompact 3.30 V/F have?
The only figure for the Agrocompact 3.30 V/F is 53.2 hp (39.7 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.
Source · Traktorenlexikon, “Deutz-Fahr AgroCompact 3.30”
What engine is in an Agrocompact 3.30 V/F?
An Agrocompact 3.30 V/F has a KHD F3L 912, a 3-cylinder 2.83 L diesel engine.
| Make & model | KHD F3L 912 |
|---|---|
| Cylinders | 3, air-cooledSource 2 |
| Displacement | 172.5 ci · 2.83 L |
| Max torque | 129 lb·ft · 175 N·mSource 2 |
| Electrical system | 12 VSource 2 |
Source · Traktorenlexikon, “Deutz D 4006 P”
How much will an Agrocompact 3.30 V/F lift?
An Agrocompact 3.30 V/F lifts 4,850 lb (2,200.000 kg) at the lower-link ends.
| Lift at ends | 4,850 lb · 2,200.000 kgFrom the Traktorenlexikon article's hydraulics section. |
|---|---|
| Rear PTO | Independent, engine-driven, 540 rpm / 1000 rpm |
Source · Traktorenlexikon, “Deutz-Fahr AgroCompact 3.30”
What transmission does an Agrocompact 3.30 V/F have?
Transmission specifications for the Agrocompact 3.30 V/F are below.
| Top speed | 21.7–24.9 mph · 35–40 km/h |
|---|
Source · Traktorenlexikon, “Deutz-Fahr AgroCompact 3.30”
How much does an Agrocompact 3.30 V/F weigh?
An Agrocompact 3.30 V/F weighs 4,740–5,181 lb (2,150–2,350 kg) unladen.
| Unladen weight | 4,740–5,181 lb · 2,150–2,350 kg |
|---|---|
| Maximum permissible mass | 8,818 lb · 4,000 kg |
| Maximum front axle load | 3,527 lb · 1,600 kg |
| Maximum rear axle load | 6,614 lb · 3,000 kg |
| Wheelbase | 75.4 in · 1,915 mm |
| Length | 131.5 in · 3,340 mm |
| Width | 39.4–47.2 in · 1,000–1,200 mmthe article lists alternatives |
| Height | 78.1–80.8 in · 1,985–2,052 mm |
| Ground clearance | 10.2–12.0 in · 260–305 mm |
| Front track | 31.5–33.9 in · 800–860 mmF: 920-990; the article lists alternatives |
| Rear track | 29.4–40.0 in · 748–1,016 mmF: 872-1,000 |
Source · Traktorenlexikon, “Deutz-Fahr AgroCompact 3.30”
What oil does an Agrocompact 3.30 V/F take, and how much?
An Agrocompact 3.30 V/F engine takes 9.5 qt (9 L). Single source, not independently verified — always confirm against the operator’s manual for your machine.
| System | Capacity |
|---|---|
| Engine oil | 9.5 qt · 9 LSource: Traktorenlexikon, “Deutz-Fahr AgroCompact 3.30” · single source, not independently verified |
| Transmission | 22.7 qt · 21.5 LSource: Traktorenlexikon, “Deutz-Fahr AgroCompact 3.30” · single source, not independently verified |
Always confirm against the operator’s manual for your machine before service.
Which tractors compare with an Agrocompact 3.30 V/F?
Within 10% of its 53.2 hp of claimed engine power, the same type, and first built within 15 years of it.
- Renault Ceres 65 (A)53.2 hp engine, claimed · 1993–1995Side by side with the Agrocompact 3.30 V/F →
- Renault 58-12 MX53.2 hp engine, claimed · 1989–1993Side by side with the Agrocompact 3.30 V/F →
- Renault 58-34 MX53.2 hp engine, claimed · 1989–1993Side by side with the Agrocompact 3.30 V/F →
- Renault 58-12 LS53.2 hp engine, claimed · 1987–1989Side by side with the Agrocompact 3.30 V/F →
- Renault 58-14 LS53.2 hp engine, claimed · 1987–1989Side by side with the Agrocompact 3.30 V/F →
- Fiat 466 (DT)53.2 hp engine, claimed · 1982–1986Side by side with the Agrocompact 3.30 V/F →
Common questions about the Deutz-Fahr Agrocompact 3.30 V/F
Is an Agrocompact 3.30 V/F two-wheel drive or four-wheel drive?
The Deutz-Fahr Agrocompact 3.30 V/F was offered in two-wheel-drive and four-wheel-drive versions.
What PTO does an Agrocompact 3.30 V/F have?
An Agrocompact 3.30 V/F has a independent 540 rpm / 1000 rpm rear PTO.
Sources and how this page was built
Compiled from Traktorenlexikon, “Deutz-Fahr AgroCompact 3.30”; and Traktorenlexikon, “Deutz D 4006 P”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Deutz D 4006 P — CC BY-SA 4.0, WIKIBOOKS-TL-51750 · revision 938076. Wikibooks contributors (Traktorenlexikon). Original document
- Traktorenlexikon: Deutz-Fahr AgroCompact 3.30 — CC BY-SA 4.0, WIKIBOOKS-TL-103551 · revision 990371. Wikibooks contributors (Traktorenlexikon). Original document