10 material differences · fewer than 12
Tractor oneDeutz-Fahr Agrocompact 3.30 V/F1992–1996No measured PTO figureTractor twoRenault 58-12 LS1987–1989No measured PTO figure
Which should you choose?
Read our verdict on the Agrocompact 3.30 V/F and the 58-12 LS → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
10 material differences · 2 fields identical or within 5%, which is not counted as material
| Field | Agrocompact 3.30 V/F | 58-12 LS | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 53.2 hp | 53.2 hp | — |
| Engine declared | KHD F3L 912 | MWM D 226-3 | differs |
| Displacement declared | 2.83 L | 3.12 L | +10% 58-12 LS |
| Maximum torque declared | 129 lb·ft · 175 N·m | — | — |
| Transmission | |||
| Top speed declared | 21.7–24.9 mph · 35–40 km/h | 18.6 mph · 30 km/h | differs |
| Clutch declared | — | Dry VALEO double clutch | — |
| Hydraulics & hitch | |||
| Pump flow declared | — | 8.5 gpm · 32.3 L/min | — |
| Rear PTO speeds declared | 540 rpm / 1000 rpm | 540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 4,740–5,181 lb · 2,150–2,350 kg | 5,820 lb · 2,640 kg | differs |
| Maximum permissible mass declared | 8,818 lb · 4,000 kg | 11,244 lb · 5,100 kg | +28% 58-12 LS |
| Wheelbase declared | 75.4 in · 1,915 mm | 89.4 in · 2,270 mm | +19% 58-12 LS |
| Length declared | 131.5 in · 3,340 mm | 137.4 in · 3,490 mm | — |
| Width declared | 39.4–47.2 in · 1,000–1,200 mm | 70.3 in · 1,785 mm | differs |
| Ground clearance declared | 10.2–12.0 in · 260–305 mm | 15.7 in · 400 mm | differs |
| Turning radius, braked declared | — | 11.5 ft · 3.50 m | — |
| Fuel tank declared | 58.1 qt · 55 L | 68.7 qt · 65.0 L | +18% 58-12 LS |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Deutz-Fahr Agrocompact 3.30 V/F sources
- Source: Traktorenlexikon, “Deutz-Fahr AgroCompact 3.30”
- Source: Traktorenlexikon, “Deutz D 4006 P”
Renault 58-12 LS sources
- Source: Traktorenlexikon, “Renault 58-12 LS R3111”
- Source: Traktorenlexikon, “Renault 551 R7451”