9 material differences · fewer than 12
Tractor oneDeutz-Fahr Agrocompact 3.30 V/F1992–1996No measured PTO figureTractor twoFiat 466 (DT)1982–1986No measured PTO figure
Which should you choose?
Read our verdict on the Agrocompact 3.30 V/F and the 466 (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
9 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | Agrocompact 3.30 V/F | 466 (DT) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 53.2 hp | 53.2 hp | — |
| Engine declared | KHD F3L 912 | FIAT-IVECO 8035.02.276 or 376 | differs |
| Displacement declared | 2.83 L | 2.59 L | +9% Agrocompact 3.30 V/F |
| Maximum torque declared | 129 lb·ft · 175 N·m | 125 lb·ft · 170 N·m | — |
| Transmission | |||
| Top speed declared | 21.7–24.9 mph · 35–40 km/h | 15.5–18.6 mph · 25–30 km/h | differs |
| Clutch declared | — | dry O.M.G, VALEO or LuK double clutch | — |
| Hydraulics & hitch | |||
| Pressure declared | — | 3,336–3,481 psi · 230–240 bar | — |
| Rear PTO speeds declared | 540 rpm / 1000 rpm | 540 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 4,740–5,181 lb · 2,150–2,350 kg | 5,027 lb · 2,280 kg | differs |
| Maximum permissible mass declared | 8,818 lb · 4,000 kg | — | — |
| Wheelbase declared | 75.4 in · 1,915 mm | 85.6 in · 2,175 mm | +14% 466 (DT) |
| Length declared | 131.5 in · 3,340 mm | 126.9 in · 3,222 mm | — |
| Width declared | 39.4–47.2 in · 1,000–1,200 mm | 75.6 in · 1,920 mm | differs |
| Ground clearance declared | 10.2–12.0 in · 260–305 mm | 19.5 in · 495 mm | differs |
| Turning radius, braked declared | — | 11.8 ft · 3.60 m | — |
| Fuel tank declared | 58.1 qt · 55 L | 77.1 qt · 73.0 L | +33% 466 (DT) |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Deutz-Fahr Agrocompact 3.30 V/F sources
- Source: Traktorenlexikon, “Deutz-Fahr AgroCompact 3.30”
- Source: Traktorenlexikon, “Deutz D 4006 P”
Fiat 466 (DT) sources
- Source: Traktorenlexikon, “Fiat 466/466 DT”