- Rigid chassis
- WhichTractor size: Standard-size
- No lab test on file
- 1995–2003
It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category
Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is
Case-Steyr 9105a specs: hp, weight, years
Steyr-VALMET WD 428.80 four-cylinder diesel. The manufacturer claimed 103.7 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.
Engine power, claimed · gross or net not stated
103.7 hp
77.3 kW as stated by the source
No lab test on file
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Steyr 9105”, claimed
This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.
- Weight
- 11,056 lb
- Top speed
- 18.6–31.1 mph
Case-Steyr 9105a specs: key facts
The Case-Steyr 9105a was built from 1995 to 2003.
The Case-Steyr 9105a has a claimed engine power (gross or net not stated) of 77.3 kW (103.7 hp); it has no measured PTO figure.
The Case-Steyr 9105a is four-wheel drive (4WD).
The Case-Steyr 9105a has a Steyr-VALMET WD 428.80 engine, a 4-cylinder 4.40 L diesel unit.
The Case-Steyr 9105a weighs 5,015 kg (11,056 lb) unladen.
The Case-Steyr 9105a has an independent rear PTO running at 540 rpm / 1000 rpm.
Source · Traktorenlexikon, “Steyr 9105”
How much horsepower does a 9105a have?
The only figure for the 9105a is 103.7 hp (77.3 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.
Source · Traktorenlexikon, “Steyr 9105”
What engine is in a 9105a?
A 9105a has a Steyr-VALMET WD 428.80, a 4-cylinder 4.40 L diesel engine.
| Make & model | Steyr-VALMET WD 428.80 |
|---|---|
| Cylinders | 4, liquid-cooled |
| Displacement | 268.3 ci · 4.40 L |
| Max torque | 284 lb·ft · 385 N·m @ 1,300 rpm |
| Injection | Direct injection method |
| Electrical system | 12 V |
Source · Traktorenlexikon, “Steyr 9105”
How much will a 9105a lift?
Hydraulic and PTO specifications for the 9105a are below.
| Pressure | 3,481 psi · 240 bar |
|---|---|
| Rear PTO | Independent, engine-driven, 540 rpm / 1000 rpm @ 2,208 engine rpm |
| PTO shaft | 1 3/8"- 6 splines and 1 3/8"- 21 spline |
Source · Traktorenlexikon, “Steyr 9105”
What transmission does a 9105a have?
Transmission specifications for the 9105a are below.
| Clutch | Pedal-operated, wet ZF multi-disc clutch, type T-7224 |
|---|---|
| Brakes | Pedal-operated, wet Sirmac or Knott multi-disc brake |
| Steering | Hydrostatic ZF steering, type LAUCSDR 160/50-15-9 |
| Top speed | 18.6–31.1 mph · 30–50 km/hthe article lists alternatives |
Source · Traktorenlexikon, “Steyr 9105”
How much does a 9105a weigh?
A 9105a weighs 11,056 lb (5,015 kg) unladen.
| Unladen weight | 11,056 lb · 5,015 kg |
|---|---|
| Maximum permissible mass | 18,739 lb · 8,500 kg |
| Wheelbase | 99.4 in · 2,526 mm |
| Length | 178.3 in · 4,530 mm |
| Width | 96.5 in · 2,450 mm |
| Height | 112.2 in · 2,850 mm |
| Ground clearance | 17.7 in · 450 mm |
| Front track | 72.0–82.3 in · 1,830–2,090 mm |
| Rear track | 59.1–78.7 in · 1,500–2,000 mm |
Source · Traktorenlexikon, “Steyr 9105”
What oil does a 9105a take, and how much?
A 9105a engine takes 9.0 qt (8.5 L). Single source, not independently verified — always confirm against the operator’s manual for your machine.
| System | Capacity |
|---|---|
| Engine oil | 9.0 qt · 8.5 LSource: Traktorenlexikon, “Steyr 9105” · single source, not independently verified |
| Hydraulic | 74.0 qt · 70.0 LSource: Traktorenlexikon, “Steyr 9105” · single source, not independently verified |
| Cooling system | 12.7 qt · 12.0 LSource: Traktorenlexikon, “Steyr 9105” · single source, not independently verified |
Always confirm against the operator’s manual for your machine before service.
Which tractors compare with a 9105a?
Within 10% of its 103.7 hp of claimed engine power, the same type, and first built within 15 years of it.
- John Deere 6506103.7 hp engine, claimed · 1995–1997Side by side with the 9105a →
- Deutz-Fahr Agrotron 110103.7 hp engine, claimed · 1997–2000Side by side with the 9105a →
- John Deere 2900103.7 hp engine, claimed · 1993–1996Side by side with the 9105a →
- John Deere 3055103.7 hp engine, claimed · 1992–1993Side by side with the 9105a →
- Massey Ferguson 6260 (A)103.7 hp engine, claimed · 1999–2003Side by side with the 9105a →
- Massey Ferguson 6265 (A)103.7 hp engine, claimed · 1999–2003Side by side with the 9105a →
Common questions about the Case-Steyr 9105a
Is a 9105a two-wheel drive or four-wheel drive?
The Case-Steyr 9105a is four-wheel drive (4WD).
What PTO does a 9105a have?
A 9105a has a independent 540 rpm / 1000 rpm rear PTO on a 1 3/8"- 6 splines and 1 3/8"- 21 spline shaft.
Sources and how this page was built
Compiled from Traktorenlexikon, “Steyr 9105”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Steyr 9105 — CC BY-SA 4.0, WIKIBOOKS-TL-85891 · revision 993756. Wikibooks contributors (Traktorenlexikon). Original document