Case-Steyr 9105 a vs John Deere 2900

12 material differences

Tractor one

1995–2003

No measured PTO figure

Tractor two

1993–1996

No measured PTO figure

Which should you choose?

Read our verdict on the 9105 a and the 2900 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

12 material differences · 2 fields identical or within 5%, which is not counted as material

Case-Steyr 9105 a and John Deere 2900, field by field
Field	9105 a	2900	Gap
Engine
Engine power, claimed claimed	103.7 hp	103.7 hp	—
Engine declared	Steyr-VALMET WD 428.80	ZETOR 1301	differs
Displacement declared	4.40 L	4.16 L	+6% 9105 a
Maximum torque declared	284 lb·ft · 385 N·m	269 lb·ft · 365 N·m	+5% 9105 a
Transmission
Top speed declared	18.6–31.1 mph · 30–50 km/h	18.6–21.7 mph · 30–35 km/h	differs
Clutch declared	Pedal-operated, wet ZF multi-disc clutch, type T-7224	—	—
Hydraulics & hitch
Pressure declared	3,481 psi · 240 bar	—	—
Three-point lift at ends declared	—	9,833 lb · 4,460 kg	—
Rear PTO speeds declared	540 rpm / 1000 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	11,056 lb · 5,015 kg	9,215 lb · 4,180 kg	+20% 9105 a
Maximum permissible mass declared	18,739 lb · 8,500 kg	16,535 lb · 7,500 kg	+13% 9105 a
Wheelbase declared	99.4 in · 2,526 mm	93.3 in · 2,369 mm	+7% 9105 a
Length declared	178.3 in · 4,530 mm	172.4 in · 4,380 mm	—
Width declared	96.5 in · 2,450 mm	82.7 in · 2,100 mm	+17% 9105 a
Height declared	112.2 in · 2,850 mm	106.5 in · 2,705 mm	+5% 9105 a
Ground clearance declared	17.7 in · 450 mm	14.2 in · 360 mm	+25% 9105 a
Turning radius, braked declared	—	15.2 ft · 4.62 m	—
Fuel tank declared	232.5 qt · 220.0 L	169.1 qt · 160.0 L	+38% 9105 a

Source

Source