Case-Steyr 9105 a vs Massey Ferguson MF 6260 (A)

9 material differences · fewer than 12

Tractor one

1995–2003

No measured PTO figure

Tractor two

1999–2003

No measured PTO figure

Which should you choose?

Read our verdict on the 9105 a and the MF 6260 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 7 fields identical or within 5%, which is not counted as material

Case-Steyr 9105 a and Massey Ferguson MF 6260 (A), field by field
Field	9105 a	MF 6260 (A)	Gap
Engine
Engine power, claimed claimed	103.7 hp	103.7 hp	—
Engine declared	Steyr-VALMET WD 428.80	Perkins 1006.60 NA	differs
Displacement declared	4.40 L	5.99 L	+36% MF 6260 (A)
Maximum torque declared	284 lb·ft · 385 N·m	292 lb·ft · 396 N·m	—
Transmission
Top speed declared	18.6–31.1 mph · 30–50 km/h	24.9 mph · 40 km/h	differs
Clutch declared	Pedal-operated, wet ZF multi-disc clutch, type T-7224	Pedal-operated hydraulic VALEO multi-plate clutch	differs
Hydraulics & hitch
Pump flow declared	—	25.3 gpm · 95.7 L/min	—
Pressure declared	3,481 psi · 240 bar	3,336 psi · 230 bar	—
Three-point lift at ends declared	—	14,330 lb · 6,500 kg	—
Rear PTO speeds declared	540 rpm / 1000 rpm	540/1000/540E/1000E rpm	differs
Weight & dimensions
Unladen weight declared	11,056 lb · 5,015 kg	9,954 lb · 4,515 kg	+11% 9105 a
Maximum permissible mass declared	18,739 lb · 8,500 kg	19,401 lb · 8,800 kg	—
Wheelbase declared	99.4 in · 2,526 mm	107.1 in · 2,720 mm	+8% MF 6260 (A)
Length declared	178.3 in · 4,530 mm	172.8 in · 4,390 mm	—
Width declared	96.5 in · 2,450 mm	82.0 in · 2,083 mm	+18% 9105 a
Height declared	112.2 in · 2,850 mm	114.2 in · 2,900 mm	—
Ground clearance declared	17.7 in · 450 mm	20.1 in · 510 mm	+13% MF 6260 (A)
Fuel tank declared	232.5 qt · 220.0 L	237.8 qt · 225.0 L	—

Source

Source