WhichTractor
  • Standard layout, Rigid chassis
  • WhichTractor size: Standard-size
  • Lab tested ×1
  • 1997–2002

WhichTractor size, not the maker’s category

Case-IH MX 120 Hydraulics & PTO specifications

21 hydraulics and PTO values on record for the MX 120.

Measured at the PTO shaft

109.6 hp

Brochure claimed 118.4 hp difference −7%

Source · OECD Test 1678, measured

How much will an MX 120 lift?

An MX 120 lifts 11,521 lb (5,226 kg) at the lower-link ends.

Hydraulics & hitch — MX 120 Hydraulics & hitch
Hydraulic centreClosed centreSource 1
Pump flow28.8 gpm · 109 L/min
Hydraulic pressure3,408 psi · 235 bar
Three-point hitch categoryCategory 2
Lift capacity at ball ends11,521 lb · 5,226 kg
Hitch controlLifting, lowering, lowering throttle, float position, draft, position and mixed control
Front hitch available, optionalYes

Source · Traktorenlexikon, “Case-IH MX120”

What PTO does an MX 120 have?

An MX 120 has a 540/1000 rpm rear PTO.

PTO — MX 120 PTO
Rear PTO speeds540/1000 rpm
Engine speed at 540 PTO1,875 rpm
Rear PTO shaft1 3/8"- 6 splines or 1 3/8"- 21 spline
Front PTO available, optionalYes
PTO power, claimed106.2 hp · 79.2 kWClaimed; standard not stated by the source

Source · Traktorenlexikon, “Case-IH MX120”

How much power does an MX 120 deliver at the PTO?

On OECD Test 1678, the MX 120 delivered 109.6 hp (81.7 kW) at the PTO shaft, at maximum power.

OECD Test 1678 — MX 120 as tested, configuration as printed: “4 WD · MAXXUM - 16 speeds - 30 km/h”
PTO power, at maximum power109.6 hp · 81.7 kWSource 2At 905 PTO rpmAt 2,000 engine rpm
PTO power, at rated engine speed106.2 hp · 79.2 kWSource 2At 996 PTO rpmAt 2,200 engine rpm
PTO power, at standard PTO speed106.2 hp · 79.2 kWSource 2At 996 PTO rpmAt 2,200 engine rpm
PTO shaft speed, at maximum power905 rpmSource 2
PTO shaft speed, at rated engine speed996 rpmSource 2
PTO shaft speed, at standard PTO speed996 rpmSource 2
Hydraulic power, at maximum power30.2 hp · 22.5 kWSource 2
Hydraulic pump delivery, at maximum power23.8 gpm · 90.1 L/minSource 2
Three-point lift force10,049 lbf · 44.7 kNSource 2

Source · OECD test report 1678, 1997

Where this page comes from

21 hydraulics and PTO values from OECD test report 1678, 1997; and Traktorenlexikon, “Case-IH MX120”.

Last verified

Not yet verified

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. OECD Code 2 test report 1 678/1: Case IH MX 120 — Licence not stated by the publisher; facts cited, OECD-1678 · published 1997-10-02 · retrieved 2026-09-14. OECD; testing station DLG, Gross-Umstadt, Germany. Original document
  2. OECD Code 2 test report 1 678/2: Case IH MX 120 — Licence not stated by the publisher; facts cited, OECD-1678 · published 1997-10-02 · retrieved 2026-09-14. OECD; testing station DLG, Gross-Umstadt, Germany. Original document
  3. Traktorenlexikon: Case-IH MX120 — CC BY-SA 4.0, WIKIBOOKS-TL-89520 · revision 980922. Wikibooks contributors (Traktorenlexikon). Original document