• Vehicle type: unspecified
  • Rigid chassis
  • WhichTractor size: Standard-size
  • Not independently tested
  • 1945–1950
  • 4,000 built

It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category

We looked and the record does not say what this machine is. How we decide what a machine is

BOLINDER-MUNKTELL BM-20 Full specifications

BOLINDER W-5 two-cylinder diesel. The manufacturer claimed 40.5 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.

Engine power, claimed · gross or net not stated

40.5 hp

30.2 kW as stated by the source

Not independently tested

Claimed · standard not stated by the source

Source · Traktorenlexikon, “Bolinder-Munktell BM 20”, claimed

Weight
5,842 lb
Top speed
12.4 mph

BOLINDER-MUNKTELL BM-20 specs: key facts

  • The BOLINDER-MUNKTELL BM-20 was built from 1945 to 1950.

  • The BOLINDER-MUNKTELL BM-20 has a claimed engine power (gross or net not stated) of 30.2 kW (40.5 hp); it has no measured PTO figure.

  • The BOLINDER-MUNKTELL BM-20 is two-wheel drive (2WD).

  • The BOLINDER-MUNKTELL BM-20 has a BOLINDER W-5 engine, a 2-cylinder 5.31 L diesel unit.

  • The BOLINDER-MUNKTELL BM-20 weighs 2,650 kg (5,842 lb) unladen.

  • The BOLINDER-MUNKTELL BM-20 has a rear PTO running at 545 rpm.

Source · Traktorenlexikon, “Bolinder-Munktell BM 20”

How much horsepower does a BM-20 have?

The only figure for the BM-20 is 40.5 hp (30.2 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.

Engine, claimed (gross/net not stated)
40.5 hp

Source · Traktorenlexikon, “Bolinder-Munktell BM 20”

What engine is in a BM-20?

A BM-20 has a BOLINDER W-5, a 2-cylinder 5.31 L diesel engine.

Engine — BM-20 engine specifications
Make & modelBOLINDER W-5
Cylinders2, liquid-cooled
Displacement324.2 ci · 5.31 L
Electrical system24 V

Source · Traktorenlexikon, “Bolinder-Munktell BM 20”

How much will a BM-20 lift?

Hydraulic and PTO specifications for the BM-20 are below.

Hydraulics & PTO — BM-20 hydraulics and PTO specifications
Rear PTO545 rpm

Source · Traktorenlexikon, “Bolinder-Munktell BM 20”

What transmission does a BM-20 have?

Transmission specifications for the BM-20 are below.

Transmission — BM-20 transmission specifications
Top speed12.4 mph · 20 km/h

Source · Traktorenlexikon, “Bolinder-Munktell BM 20”

How much does a BM-20 weigh?

A BM-20 weighs 5,842 lb (2,650 kg) unladen.

Weights & dimensions — BM-20 weights and dimensions
Unladen weight5,842 lb · 2,650 kg
Wheelbase70.9 in · 1,800 mm
Length128.0 in · 3,250 mm
Width68.9 in · 1,750 mm
Height72.0 in · 1,830 mm
Front track52.4 in · 1,330 mm
Rear track55.1 in · 1,400 mm

Source · Traktorenlexikon, “Bolinder-Munktell BM 20”

Which tractors compare with a BM-20?

Within 10% of its 40.5 hp of claimed engine power, the same type, and first built within 15 years of it.

Everything else people ask

Is a BM-20 two-wheel drive or four-wheel drive?

The BOLINDER-MUNKTELL BM-20 is two-wheel drive (2WD).

What PTO does a BM-20 have?

A BM-20 has a 545 rpm rear PTO.

Where this page comes from

Compiled from Traktorenlexikon, “Bolinder-Munktell BM 20”.

Last verified

Not yet verified

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. Traktorenlexikon: Bolinder-Munktell BM 20CC BY-SA 4.0, WIKIBOOKS-TL-116141 · revision 1001563. Wikibooks contributors (Traktorenlexikon). Original document