- Vehicle type: unspecified
- Rigid chassis
- WhichTractor size: Utility
- Not independently tested
- 1940–1950
- 84,030 built
It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category
We looked and the record does not say what this machine is. How we decide what a machine is
ALLIS-CHALMERS Modell-C Full specifications
The manufacturer claimed 18.2 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.
Engine power, claimed · gross or net not stated
18.2 hp
13.6 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Allis-Chalmers Modell C”, claimed
- Weight
- 2,200 lb
- Top speed
- 7.5 mph
ALLIS-CHALMERS Modell-C specs: key facts
The ALLIS-CHALMERS Modell-C was built from 1940 to 1950.
The ALLIS-CHALMERS Modell-C has a claimed engine power (gross or net not stated) of 13.6 kW (18.2 hp); it has no measured PTO figure.
The ALLIS-CHALMERS Modell-C is two-wheel drive (2WD).
The ALLIS-CHALMERS Modell-C weighs 998 kg (2,200 lb) unladen.
The ALLIS-CHALMERS Modell-C has a rear PTO running at 560 rpm.
Source · Traktorenlexikon, “Allis-Chalmers Modell C”
How much horsepower does a Modell-C have?
The only figure for the Modell-C is 18.2 hp (13.6 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.
Source · Traktorenlexikon, “Allis-Chalmers Modell C”
How much will a Modell-C lift?
Hydraulic and PTO specifications for the Modell-C are below.
| Rear PTO | 560 rpm |
|---|---|
| PTO shaft | 1 3/8"- 6 splines |
Source · Traktorenlexikon, “Allis-Chalmers Modell C”
What transmission does a Modell-C have?
Transmission specifications for the Modell-C are below.
| Clutch | Foot-operated spring-loaded dry Rockford single-plate clutch |
|---|---|
| Steering | Mechanical Ross worm steering |
| Top speed | 7.5 mph · 12 km/h |
Source · Traktorenlexikon, “Allis-Chalmers Modell C”
How much does a Modell-C weigh?
A Modell-C weighs 2,200 lb (998 kg) unladen.
| Unladen weight | 2,200 lb · 998 kg |
|---|---|
| Wheelbase | 77.0 in · 1,956 mm |
| Length | 110.2 in · 2,800 mm |
| Width | 68.5 in · 1,740 mm |
| Height | 76.7 in · 1,949 mm |
| Ground clearance | 23.0 in · 584 mm |
| Front track | 10.5 in · 267 mm |
| Rear track | 52.0–80.0 in · 1,321–2,032 mm |
Source · Traktorenlexikon, “Allis-Chalmers Modell C”
Everything else people ask
Is a Modell-C two-wheel drive or four-wheel drive?
The ALLIS-CHALMERS Modell-C is two-wheel drive (2WD).
What PTO does a Modell-C have?
A Modell-C has a 560 rpm rear PTO on a 1 3/8"- 6 splines shaft.
Where this page comes from
Compiled from Traktorenlexikon, “Allis-Chalmers Modell C”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Allis-Chalmers Modell C — CC BY-SA 4.0, WIKIBOOKS-TL-116572 · revision 1001550. Wikibooks contributors (Traktorenlexikon). Original document