• Rigid chassis
  • WhichTractor size: Compact
  • Not independently tested
  • 1962–1965

It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category

Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is

ALLIS-CHALMERS FD-3 Full specifications

VENDEUVRE 52 diesel. The manufacturer claimed 24.7 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.

Engine power, claimed · gross or net not stated

24.7 hp

18.4 kW as stated by the source

Not independently tested

Claimed · standard not stated by the source

Source · Traktorenlexikon, “Allis-Chalmers FD 3”, claimed

Weight
3,153 lb
3-point lift
1,764 lb
Top speed
12.4 mph

ALLIS-CHALMERS FD-3 specs: key facts

  • The ALLIS-CHALMERS FD-3 was built from 1962 to 1965.

  • The ALLIS-CHALMERS FD-3 has a claimed engine power (gross or net not stated) of 18.4 kW (24.7 hp); it has no measured PTO figure.

  • The ALLIS-CHALMERS FD-3 is two-wheel drive (2WD).

  • The ALLIS-CHALMERS FD-3 has a VENDEUVRE 52 engine, a diesel unit.

  • The ALLIS-CHALMERS FD-3 weighs 1,430 kg (3,153 lb) unladen.

  • The ALLIS-CHALMERS FD-3 has an independent rear PTO running at 540/1000 rpm.

  • The three-point hitch of the ALLIS-CHALMERS FD-3 lifts 800 kg (1,764 lb) at the lower-link ends.

Source · Traktorenlexikon, “Allis-Chalmers FD 3”

How much horsepower does a FD-3 have?

The only figure for the FD-3 is 24.7 hp (18.4 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.

Engine, claimed (gross/net not stated)
24.7 hp

Source · Traktorenlexikon, “Allis-Chalmers FD 3”

What engine is in a FD-3?

A FD-3 has a VENDEUVRE 52, a diesel engine.

Engine — FD-3 engine specifications
Make & modelVENDEUVRE 52
Max torque53 lb·ft · 71.6 N·m @ 1,900 rpm
Injectionpre-chamber injection

Source · Traktorenlexikon, “Allis-Chalmers FD 3”

How much will a FD-3 lift?

A FD-3 lifts 1,764 lb (800 kg) at the lower-link ends.

Hydraulics & PTO — FD-3 hydraulics and PTO specifications
Lift at ends1,764 lb · 800 kg
Rear PTOIndependent, engine-driven, 540/1000 rpm @ 1,800 engine rpmGround-speed PTO available
PTO shaft1 3/8"- 6 splines

Source · Traktorenlexikon, “Allis-Chalmers FD 3”

What transmission does a FD-3 have?

Transmission specifications for the FD-3 are below.

Transmission — FD-3 transmission specifications
ClutchPedal operated dry two stage double clutch
BrakesLockable service brake designed as a hand brake
SteeringMechanical worm steering
Top speed12.4 mph · 20 km/h

Source · Traktorenlexikon, “Allis-Chalmers FD 3”

How much does a FD-3 weigh?

A FD-3 weighs 3,153 lb (1,430 kg) unladen.

Weights & dimensions — FD-3 weights and dimensions
Unladen weight3,153 lb · 1,430 kg
Wheelbase76.8–80.7 in · 1,950–2,050 mmthe article lists alternatives
Length112.2 in · 2,850 mm
Width63.0 in · 1,600 mm
Height51.2 in · 1,300 mm
Ground clearance15.7 in · 400 mm
Front track44.5–60.6 in · 1,130–1,539 mm
Rear track50.4–65.7 in · 1,280–1,670 mm

Source · Traktorenlexikon, “Allis-Chalmers FD 3”

Which tractors compare with a FD-3?

Within 10% of its 24.7 hp of claimed engine power, the same type, and first built within 15 years of it.

Everything else people ask

Is a FD-3 two-wheel drive or four-wheel drive?

The ALLIS-CHALMERS FD-3 is two-wheel drive (2WD).

What PTO does a FD-3 have?

A FD-3 has a independent 540/1000 rpm rear PTO on a 1 3/8"- 6 splines shaft.

Where this page comes from

Compiled from Traktorenlexikon, “Allis-Chalmers FD 3”.

Last verified

Not yet verified

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. Traktorenlexikon: Allis-Chalmers FD 3CC BY-SA 4.0, WIKIBOOKS-TL-116636 · revision 1016219. Wikibooks contributors (Traktorenlexikon). Original document