- Rigid chassis
- WhichTractor size: Utility
- Not independently tested
- 1980–1986
It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category
AGRIFULL 80-66 (DT) Hydraulics & PTO specifications
15 hydraulics and PTO values on record for the 80-66 (DT).
Engine power, claimed · gross or net not stated
67 hp
50 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Agrifull 80-66”, claimed
What hydraulics does an 80-66 (DT) have?
Hydraulic and hitch specifications for the 80-66 (DT) are below.
| Pump flow | 8.5 gpm · 32.1 L/min |
|---|---|
| Hydraulic pressure | 3,118 psi · 215 bar |
| Rear remote valves | 3 |
| Rear remote valves, optional | 6 |
| Lift capacity 610 mm behind ends | 4,833 lb · 2,192 kg |
| Hitch control | Lifting, lowering, float position, draft, mixed and position control |
Source · Traktorenlexikon, “Agrifull 80-66”
What PTO does an 80-66 (DT) have?
An 80-66 (DT) has a 540 rpm rear PTO.
| Rear PTO drive | Engine-driven |
|---|---|
| Ground-speed PTO | Yes |
| Rear PTO independence | Independent |
| PTO engages under load | Yes |
| Rear PTO speeds | 540 rpm |
| Rear PTO speeds, optional | 540/1000 rpm |
| Engine speed at 540 PTO | 2,198 rpm |
| Engine speed at 540 PTO, optional | 2,381 rpm |
| Rear PTO shaft | 1 3/8"- 6 splines |
Source · Traktorenlexikon, “Agrifull 80-66”
Where this page comes from
15 hydraulics and PTO values from Traktorenlexikon, “Agrifull 80-66”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Agrifull 80-66 — CC BY-SA 4.0, WIKIBOOKS-TL-122071 · revision 1078758. Wikibooks contributors (Traktorenlexikon). Original document