WhichTractor
  • Rigid chassis
  • WhichTractor size: Utility
  • No lab test on file
  • 1980–1986

It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category

Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is

AGRIFULL 80-66 (DT) specs: hp, weight, years

MWM D-325-4 four-cylinder diesel. The manufacturer claimed 67 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.

Engine power, claimed · gross or net not stated

67 hp

50 kW as stated by the source

No lab test on file

Claimed · standard not stated by the source

Source · Traktorenlexikon, “Agrifull 80-66”, claimed

This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.

Weight
5,556 lb
Hyd. flow
8.5 gpm
Top speed
15.5 mph

AGRIFULL 80-66 (DT) specs: key facts

  • The AGRIFULL 80-66 (DT) was built from 1980 to 1986.

  • The AGRIFULL 80-66 (DT) has a claimed engine power (gross or net not stated) of 50 kW (67 hp); it has no measured PTO figure.

  • The AGRIFULL 80-66 (DT) was offered in two-wheel-drive and four-wheel-drive versions.

  • The AGRIFULL 80-66 (DT) has a MWM D-325-4 engine, a 4-cylinder 3.40 L diesel unit.

  • The AGRIFULL 80-66 (DT) weighs 2,520 kg (5,556 lb) unladen.

  • The AGRIFULL 80-66 (DT) has an independent rear PTO running at 540 rpm.

  • The hydraulic pump of the AGRIFULL 80-66 (DT) delivers 32.1 L/min (8.5 gpm).

Source · Traktorenlexikon, “Agrifull 80-66”

How does the 80-66 (DT) compare with its class?

  • Limitation:

    A maximum engine torque of 208 N·m is low for its class — 15% below the median of 245 N·m across the 294 machines within 10% of its power that hold this figure.

Derived by WhichTractor from 356 comparable records. How we work this out

Illustration of the 1980–1986 AGRIFULL 80-66 (DT), a 67 hp farm tractor, four-wheel-drive version, a drawing generated from its specification record
Illustration — not a photograph · four-wheel-drive version

How much horsepower does an 80-66 (DT) have?

The only figure for the 80-66 (DT) is 67 hp (50 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.

Engine, claimed (gross/net not stated)
67 hp

Source · Traktorenlexikon, “Agrifull 80-66”

What engine is in an 80-66 (DT)?

An 80-66 (DT) has an MWM D-325-4, a 4-cylinder 3.40 L diesel engine.

Engine — 80-66 (DT) engine specifications
Make & modelMWM D-325-4
Cylinders4, air-cooled
Displacement207.6 ci · 3.40 L
Max torque153 lb·ft · 208 N·m @ 1,600 rpm
InjectionDirect injection
Electrical system12 V

Source · Traktorenlexikon, “Agrifull 80-66”

How much will an 80-66 (DT) lift, and what is its hydraulic flow?

Hydraulic and PTO specifications for the 80-66 (DT) are below.

Hydraulics & PTO — 80-66 (DT) hydraulics and PTO specifications
Pump flow8.5 gpm · 32.1 L/min
Pressure3,118 psi · 215 bar
Rear PTOIndependent, engine-driven, 540 rpm @ 2,198 engine rpmEngages under loadGround-speed PTO available
PTO shaft1 3/8"- 6 splines

Source · Traktorenlexikon, “Agrifull 80-66”

What transmission does an 80-66 (DT) have?

Transmission specifications for the 80-66 (DT) are below.

Transmission — 80-66 (DT) transmission specifications
ClutchDry VALEO or LuK double clutch
BrakesPedal-operated hydraulic oil bath disc brake acting on the differential half-shafts
SteeringHydrostatic steering with double-acting steering cylinders
Top speed15.5 mph · 25 km/h

Source · Traktorenlexikon, “Agrifull 80-66”

How much does an 80-66 (DT) weigh?

An 80-66 (DT) weighs 5,556 lb (2,520 kg) unladen.

Weights & dimensions — 80-66 (DT) weights and dimensions
Unladen weight5,556 lb · 2,520 kgDT: 2,850
Wheelbase90.7 in · 2,305 mmDT: 2,249
Length134.3 in · 3,412 mm
Width76.0 in · 1,930 mm
Height92.7 in · 2,355 mm
Ground clearance20.7 in · 525 mmDT: 390
Front track55.1–74.8 in · 1,400–1,900 mmDT: 1,630-1,955
Rear track55.1–78.7 in · 1,400–2,000 mm
Turning radius, braked12.6 ft · 3.84 mDT: 4,200

Source · Traktorenlexikon, “Agrifull 80-66”

What oil does an 80-66 (DT) take, and how much?

An 80-66 (DT) engine takes 10.6 qt (10.0 L). Single source, not independently verified — always confirm against the operator’s manual for your machine.

80-66 (DT) fluid capacities, grades and service intervals
SystemCapacity
Engine oil10.6 qt · 10.0 LSource: Traktorenlexikon, “Agrifull 80-66” · single source, not independently verified
Transmission & hydraulic50.5 qt · 47.8 LSource: Traktorenlexikon, “Agrifull 80-66” · single source, not independently verified
Front axle1.7 qt · 1.6 LSource: Traktorenlexikon, “Agrifull 80-66” · single source, not independently verified

Always confirm against the operator’s manual for your machine before service.

Which tractors compare with an 80-66 (DT)?

Within 10% of its 67 hp of claimed engine power, the same type, and first built within 15 years of it.

Common questions about the AGRIFULL 80-66 (DT)

Is an 80-66 (DT) two-wheel drive or four-wheel drive?

The AGRIFULL 80-66 (DT) was offered in two-wheel-drive and four-wheel-drive versions.

What PTO does an 80-66 (DT) have?

An 80-66 (DT) has a independent 540 rpm rear PTO on a 1 3/8"- 6 splines shaft.

Sources and how this page was built

Compiled from Traktorenlexikon, “Agrifull 80-66”.

Sources checked

14 SEP 2026

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. Traktorenlexikon: Agrifull 80-66 — CC BY-SA 4.0, WIKIBOOKS-TL-122071 · revision 1078758. Wikibooks contributors (Traktorenlexikon). Original document