Massey Ferguson MF 8260 A or New Holland TG 210 (Traktorenlexikon)?
Which should you choose?
The data can’t decide this. Power at the PTO shaft cannot be compared: the MF 8260 A has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the TG 210 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | MF 8260 A | TG 210 | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 154.6 kW (207.3 hp)Traktorenlexikon, “Massey Ferguson MF 8260” | 154.5 kW (207.2 hp)Traktorenlexikon, “New Holland TG 210” | Not comparableNot comparable on power at the PTO shaft: the MF 8260 A has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the TG 210 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the MF 8260 A and the TG 210. |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the MF 8260 A and the TG 210. |
| Which pumps more oil for implements? | 125.2 L/min (33.1 gpm)Traktorenlexikon, “Massey Ferguson MF 8260” | 146.1 L/min (38.6 gpm)Traktorenlexikon, “New Holland TG 210” | AheadThe New Holland TG 210 has 17% more hydraulic flow (20.9 L/min / 5.5 gpm) than the Massey Ferguson MF 8260 A (both pump flow, as stated by the source). |
| Which lifts more on the three-point hitch? | 10,401 kg (22,931 lb)Traktorenlexikon, “Massey Ferguson MF 8260” | 4,290 kg (9,458 lb)Traktorenlexikon, “New Holland TG 210” | AheadThe Massey Ferguson MF 8260 A has 142% more lift (6,111 kg / 13,473 lb) than the New Holland TG 210 (both lift at the hitch ends, as stated by the source). |
| Which is heavier, for traction? | 8,160 kg (17,990 lb)Traktorenlexikon, “Massey Ferguson MF 8260” | 9,283 kg (20,466 lb)Traktorenlexikon, “New Holland TG 210” | Ahead (a fact, not an advantage)The New Holland TG 210 is 14% heavier (1,123 kg / 2,476 lb) than the Massey Ferguson MF 8260 A (both unladen weight, as stated by the source). |
| Which may carry more ballast and load? | — | 14,000 kg (30,865 lb)Traktorenlexikon, “New Holland TG 210” | No figureNo call on maximum permissible mass: no figure on record for the MF 8260 A. |
| Which has the wider choice of gears? | 18Traktorenlexikon, “Massey Ferguson MF 8260” | 18 to 24Traktorenlexikon, “New Holland TG 210” | EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the MF 8260 A and the TG 210. |
| Which is faster on the road? | 40 km/h (24.9 mph)Traktorenlexikon, “Massey Ferguson MF 8260” | 40 km/h (24.9 mph)Traktorenlexikon, “New Holland TG 210” | EvenEven on top speed (both top speed forward, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which offers more PTO speeds? | 540/1000 rpmTraktorenlexikon, “Massey Ferguson MF 8260” | 540 rpm / 1000 rpmTraktorenlexikon, “New Holland TG 210” | EvenEven on PTO speeds: the same speeds (540, 1000 rpm). |
| Which PTO runs independently of the ground drive? | independentTraktorenlexikon, “Massey Ferguson MF 8260” | independentTraktorenlexikon, “New Holland TG 210” | EvenEven on PTO independence: every PTO is independent. |
| Which drives on both axles? | Two-wheel or four-wheel driveTraktorenlexikon, “Massey Ferguson MF 8260” | 4WDTraktorenlexikon, “New Holland TG 210”; OECD test report 2183, 2004 | EvenEven on drive: every machine is available with four-wheel drive. |
| Which is newer, and what about parts? | 1999–2002 | 2002–2005 | EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The New Holland TG 210 has 17% more hydraulic flow (20.9 L/min / 5.5 gpm) than the Massey Ferguson MF 8260 A (both pump flow, as stated by the source).
- The Massey Ferguson MF 8260 A has 142% more lift (6,111 kg / 13,473 lb) than the New Holland TG 210 (both lift at the hitch ends, as stated by the source).
- The New Holland TG 210 is 14% heavier (1,123 kg / 2,476 lb) than the Massey Ferguson MF 8260 A (both unladen weight, as stated by the source).
- Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on top speed (both top speed forward, as stated by the source): the difference is under the 10% threshold, too small to call.
- Even on PTO speeds: the same speeds (540, 1000 rpm).
- Even on PTO independence: every PTO is independent.
- Even on drive: every machine is available with four-wheel drive.
- Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
- Not comparable on power at the PTO shaft: the MF 8260 A has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the TG 210 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, maximum permissible mass and a creeper range.
← Every figure for both machines, side by side, with sources