Landini 10.000 (DT) vs VALMET 903/903-4

13 material differences

Tractor one

1978–1993

No measured PTO figure

Tractor two

1979–1983

No measured PTO figure

Which should you choose?

Read our verdict on the 10.000 (DT) and the 903/903-4 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

13 material differences · 1 fields identical or within 5%, which is not counted as material

Landini 10.000 (DT) and VALMET 903/903-4, field by field
Field	10.000 (DT)	903/903-4	Gap
Engine
Engine power, claimed claimed	98.6 hp	92.7 hp	+6% 10.000 (DT)
Engine declared	Perkins TW 31087 U (A. 6.354.4/A. 6.354.4 HTR)	VALMET 411 CS	differs
Displacement declared	5.79 L	4.40 L	+32% 10.000 (DT)
Maximum torque declared	289 lb·ft · 392 N·m	236 lb·ft · 320 N·m	+23% 10.000 (DT)
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6 mph · 30 km/h	—
Clutch declared	Pedal-operated, dry and air-cooled double clutch	—	—
Hydraulics & hitch
Pump flow declared	12.3 gpm · 46.5 L/min	11.4 gpm · 43.0 L/min	+8% 10.000 (DT)
Three-point lift at ends declared	6,746 lb · 3,060 kg	6,393 lb · 2,900 kg	+6% 10.000 (DT)
Rear PTO speeds declared	540/1000 rpm	540 rpm	differs
Weight & dimensions
Unladen weight declared	9,976 lb · 4,525 kg	8,047 lb · 3,650 kg	+24% 10.000 (DT)
Wheelbase declared	104.7 in · 2,660 mm	91.7 in · 2,330 mm	+14% 10.000 (DT)
Length declared	171.3 in · 4,350 mm	153.7 in · 3,905 mm	+11% 10.000 (DT)
Width declared	83.9 in · 2,130 mm	77.6 in · 1,972 mm	+8% 10.000 (DT)
Height declared	113.2 in · 2,875 mm	98.4 in · 2,499 mm	+15% 10.000 (DT)
Ground clearance declared	16.9 in · 430 mm	18.1 in · 460 mm	+7% 903/903-4
Turning radius, braked declared	—	12.5 ft · 3.82 m	—
Fuel tank declared	179.6 qt · 170.0 L	95.1 qt · 90.0 L	+89% 10.000 (DT)

Source

Source