John Deere 8110 T vs Steyr-Case 9220 a

15 material differences

Tractor one

2000–2002

No measured PTO figure

Tractor two

1997–1999

No measured PTO figure

Which should you choose?

Read our verdict on the 8110 T and the 9220 a → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

15 material differences · 2 fields identical or within 5%, which is not counted as material

John Deere 8110 T and Steyr-Case 9220 a, field by field
Field	8110 T	9220 a	Gap
Engine
Engine power, claimed claimed	192.4 hp	211.2 hp	+10% 9220 a
Engine declared	John Deere-PowerTech 6.081 HRW	CASE-IH 6TA-830	differs
Displacement declared	8.13 L	8.27 L	—
Maximum torque declared	586 lb·ft · 794 N·m	667 lb·ft · 904 N·m	+14% 9220 a
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	Pedal operated hydraulic wet John Deere multi-plate clutch	Pedal-operated hydraulic wet multi-plate clutch	differs
Hydraulics & hitch
Hydraulic control declared	Load sensing	—	—
Pump flow declared	31.8 gpm · 120.4 L/min	29.7 gpm · 112.4 L/min	+7% 8110 T
Pressure declared	3,379 psi · 233 bar	2,944 psi · 203 bar	+15% 8110 T
Three-point lift at ends declared	10,971 lb · 4,976 kg	6,614 lb · 3,000 kg	+66% 8110 T
Rear PTO speeds declared	1000 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	23,649 lb · 10,727 kg	17,864 lb · 8,103 kg	+32% 8110 T
Maximum permissible mass declared	31,500 lb · 14,288 kg	25,519 lb · 11,575 kg	+23% 8110 T
Wheelbase declared	89.0 in · 2,260 mm	118.3 in · 3,006 mm	+33% 9220 a
Length declared	216.0 in · 5,487 mm	200.1 in · 5,083 mm	+8% 8110 T
Width declared	134.0 in · 3,404 mm	120.0 in · 3,048 mm	+12% 8110 T
Height declared	123.4 in · 3,135 mm	119.2 in · 3,027 mm	—
Ground clearance declared	14.2 in · 360 mm	17.3 in · 439 mm	+22% 9220 a
Fuel tank declared	519.9 qt · 492.0 L	379.4 qt · 359.0 L	+37% 8110 T

Source

Source