J.I. Case 2096 (DT) vs John Deere 7510

8 material differences · fewer than 12

Tractor one

1984–1985

No measured PTO figure

Tractor two

1999–2002

115.1 hp

Measured at the PTO · OECD Test 1959

Which should you choose?

Read our verdict on the 2096 (DT) and the 7510 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

8 material differences · 5 fields identical or within 5%, which is not counted as material

J.I. Case 2096 (DT) and John Deere 7510, field by field
Field	2096 (DT)	7510	Gap
Measured performance
PTO power, measured measured	—	115.1 hp	—
Drawbar power, measured measured	—	106.1 hp	—
Engine
Engine power, claimed claimed	114.1 hp	—	—
Engine declared	CUMMINS B6T-590	John Deere 6.068 TRW-70	differs
Displacement declared	5.88 L	6.79 L	+15% 7510
Maximum torque declared	400 lb·ft · 542 N·m	395 lb·ft · 535.0 N·m	—
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	Pedal-operated wet multi-disc driving clutch	—	—
Hydraulics & hitch
Hydraulic centre declared	—	Closed centre	—
Hydraulic control declared	—	Load sensing	—
Pump flow declared	23.0 gpm · 87.1 L/min	26.7 gpm · 101.1 L/min	+16% 7510
Pressure declared	—	2,538 psi · 175 bar	—
Three-point lift at ends declared	8,250 lb · 3,742 kg	—	—
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	11,874 lb · 5,386 kg	12,928–13,289 lb · 5,864–6,028 kg	differs
Wheelbase declared	108.0 in · 2,743 mm	103.3–111.8 in · 2,625–2,840 mm	—
Length declared	171.0 in · 4,343 mm	174.6 in · 4,435 mm	—
Width declared	101.1 in · 2,567 mm	110.6 in · 2,808 mm	+9% 7510
Height declared	118.0 in · 2,997 mm	113.4 in · 2,880 mm	—
Ground clearance declared	16.0 in · 406 mm	14.2–15.7 in · 360–400 mm	differs
Turning radius, braked declared	13.1 ft · 3.99 m	—	—
Fuel tank declared	259.9 qt · 246.0 L	199.7 qt · 189.0 L	+30% 2096 (DT)

Source

Source