J.I. Case 1175 vs J.I. Case 2096 (DT)
8 material differences · fewer than 12
Which should you choose?
Read our verdict on the 1175 and the 2096 (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
8 material differences · 6 fields identical or within 5%, which is not counted as material
| Field | 1175 | 2096 (DT) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 121.9 hp | 114.1 hp | +7% 1175 |
| Engine declared | CASE A-451 T | CUMMINS B6T-590 | differs |
| Displacement declared | 7.39 L | 5.88 L | +26% 1175 |
| Maximum torque declared | 384 lb·ft · 520 N·m | 400 lb·ft · 542 N·m | — |
| Transmission | |||
| Top speed declared | 15.5 mph · 25 km/h | 18.6 mph · 30 km/h | +20% 2096 (DT) |
| Clutch declared | — | Pedal-operated wet multi-disc driving clutch | — |
| Hydraulics & hitch | |||
| Pump flow declared | 16.0 gpm · 60.6 L/min | 23.0 gpm · 87.1 L/min | +44% 2096 (DT) |
| Three-point lift at ends declared | — | 8,250 lb · 3,742 kg | — |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 10,199 lb · 4,626 kg | 11,874 lb · 5,386 kg | +16% 2096 (DT) |
| Wheelbase declared | 108.0 in · 2,743 mm | 108.0 in · 2,743 mm | — |
| Length declared | 172.0 in · 4,370 mm | 171.0 in · 4,343 mm | — |
| Width declared | 88.0 in · 2,235 mm | 101.1 in · 2,567 mm | +15% 2096 (DT) |
| Height declared | 116.1 in · 2,950 mm | 118.0 in · 2,997 mm | — |
| Ground clearance declared | 22.2 in · 565 mm | 16.0 in · 406 mm | +39% 1175 |
| Turning radius, braked declared | 12.8 ft · 3.91 m | 13.1 ft · 3.99 m | — |
| Fuel tank declared | 200.0 qt · 189.3 L | 259.9 qt · 246.0 L | +30% 2096 (DT) |
J.I. Case 1175 sources
Source
- Source: Traktorenlexikon, “Case 1175”
- Source: Traktorenlexikon, “Case 1170”
J.I. Case 2096 (DT) sources
Source
- Source: Traktorenlexikon, “Case 2096”
- Source: Traktorenlexikon, “Case 1896”