International Harvester D-217 Standard vs Renault N 73

9 material differences · fewer than 12

Tractor one

1956–1962

No measured PTO figure

Tractor two

1960–1964

No measured PTO figure

Which should you choose?

Read our verdict on the D-217 Standard and the N 73 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 5 fields identical or within 5%, which is not counted as material

International Harvester D-217 Standard and Renault N 73, field by field
Field	D-217 Standard	N 73	Gap
Engine
Engine power, claimed claimed	16.8 hp	15.8 hp	+6% D-217 Standard
Engine declared	INTERNATIONAL-HARVESTER DD-74	MWM AKD 311 Z	differs
Displacement declared	1.22 L	1.40 L	+15% N 73
Transmission
Top speed declared	11.2 mph · 18 km/h	12.4 mph · 20 km/h	+11% N 73
Clutch declared	—	Pedal-operated dry FERODO single-disc clutch, type KZ-12 B	—
Hydraulics & hitch
Pump flow declared	5.0 gpm · 19.0 L/min	1.6 gpm · 6.0 L/min	+217% D-217 Standard
Three-point lift at ends declared	661 lb · 300 kg	2,646 lb · 1,200 kg	+300% N 73
Rear PTO speeds declared	540 rpm	540 rpm	—
Weight & dimensions
Unladen weight declared	2,612 lb · 1,185 kg	2,304 lb · 1,045 kg	+13% D-217 Standard
Wheelbase declared	68.1 in · 1,730 mm	65.4 in · 1,660 mm	—
Length declared	105.2 in · 2,672 mm	107.1 in · 2,720 mm	—
Width declared	62.2 in · 1,581 mm	59.1 in · 1,500 mm	+5% D-217 Standard
Height declared	55.0 in · 1,397 mm	58.3 in · 1,480 mm	+6% N 73
Ground clearance declared	13.9 in · 354 mm	14.6 in · 370 mm	—
Turning radius, braked declared	8.0 ft · 2.45 m	9.5 ft · 2.90 m	+18% N 73
Fuel tank declared	28.5 qt · 27 L	29.6 qt · 28.0 L	—

Source

Source