11 material differences · fewer than 12
Tractor oneGüldner G 60 A1968–1969No measured PTO figureTractor twoInternational Harvester 5851981–1990No measured PTO figure
Which should you choose?
Read our verdict on the G 60 A and the 585 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
11 material differences · 5 fields identical or within 5%, which is not counted as material
| Field | G 60 A | 585 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 58.9 hp | 58.2 hp | — |
| Engine declared | Güldner 6 L 79 | INTERNATIONAL-HARVESTER D-206 | differs |
| Displacement declared | 4.71 L | 3.38 L | +39% G 60 A |
| Maximum torque declared | 174 lb·ft · 236 N·m | 161 lb·ft · 218 N·m | +8% G 60 A |
| Transmission | |||
| Top speed declared | 16.3 mph · 26.22 km/h | 15.5 mph · 25 km/h | — |
| Clutch declared | Pedal operated dry double clutch from Fichtel & Sachs | Pedal-operated dry LAYCOCK single-disc clutch | differs |
| Hydraulics & hitch | |||
| Pressure declared | 2,134 psi · 147 bar | 2,698 psi · 186 bar | +27% 585 |
| Three-point lift, at the coupling points declared | 4,850 lb · 2,200 kg | 4,398 lb · 1,995 kg | +10% G 60 A |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 6,592 lb · 2,990 kg | 6,393 lb · 2,900 kg | — |
| Maximum permissible mass declared | 9,700 lb · 4,400 kg | — | — |
| Wheelbase declared | 91.1 in · 2,315 mm | 85.0 in · 2,159 mm | +7% G 60 A |
| Length declared | 155.7 in · 3,955 mm | 142.1 in · 3,610 mm | +10% G 60 A |
| Width declared | 73.4 in · 1,865 mm | 72.8 in · 1,850 mm | — |
| Ground clearance declared | 11.4 in · 290 mm | 14.1 in · 358 mm | +23% 585 |
| Turning radius, braked declared | 14.9 ft · 4.55 m | 10.7 ft · 3.25 m | +40% G 60 A |
| Fuel tank declared | 68.7 qt · 65 L | 118.3 qt · 112.0 L | +72% 585 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Güldner G 60 A sources
- Source: Traktorenlexikon, “Güldner G 60A”
- Source: Traktorenlexikon, “Güldner G 75”
International Harvester 585 sources
- Source: Traktorenlexikon, “IHC 585 (XL)”
- Source: Traktorenlexikon, “McCormick 624 (A)”