9 material differences · fewer than 12
Tractor oneFendt Favorit 614 SA1974–1976No measured PTO figureTractor twoHürlimann H-61351982No measured PTO figure
Which should you choose?
Read our verdict on the Favorit 614 SA and the H-6135 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
9 material differences · 2 fields identical or within 5%, which is not counted as material
| Field | Favorit 614 SA | H-6135 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 132.6 hp | 133.0 hp | — |
| Engine declared | MWM TD 226-6 | Hürlimann H-1106/13 Turbo | differs |
| Displacement declared | 6.24 L | 6.84 L | +10% H-6135 |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 15.5–18.6 mph · 25–30 km/h | differs |
| Clutch declared | Air-cooled single-disc dry clutch from Fichtel & Sachs, type G 350 K | — | — |
| Hydraulics & hitch | |||
| Pump flow declared | 10.1 gpm · 38.4 L/min | 17.2 gpm · 65.0 L/min | +69% H-6135 |
| Pressure declared | 2,538 psi · 175 bar | — | — |
| Rear PTO speeds declared | 1000 rpm | 540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 10,902 lb · 4,945 kg | 11,089 lb · 5,030 kg | — |
| Maximum permissible mass declared | 16,535 lb · 7,500 kg | — | — |
| Wheelbase declared | 106.3 in · 2,700 mm | 120.3 in · 3,055 mm | +13% H-6135 |
| Length declared | 175.7 in · 4,464 mm | 195.7 in · 4,970 mm | +11% H-6135 |
| Width declared | 84.8 in · 2,154 mm | 94.5–110.2 in · 2,400–2,800 mm | differs |
| Ground clearance declared | 17.9 in · 455 mm | — | — |
| Turning radius, braked declared | 17.7 ft · 5.40 m | — | — |
| Fuel tank declared | 190.2 qt · 180 L | 243.0 qt · 230.0 L | +28% H-6135 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Fendt Favorit 614 SA sources
- Source: Traktorenlexikon, “Fendt Favorit 614 SA”
Hürlimann H-6135 sources
- Source: Traktorenlexikon, “Hürlimann H 6135”