Deutz-Fahr IN-trac 6.60 Turbo vs Lamborghini Champion 150 (Traktorenlexikon)

10 material differences · fewer than 12

Tractor one

1986–1991

No measured PTO figure

Tractor two

1998–2004

No measured PTO figure

Which should you choose?

Read our verdict on the IN-trac 6.60 Turbo and the Champion 150 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 6 fields identical or within 5%, which is not counted as material

Deutz-Fahr IN-trac 6.60 Turbo and Lamborghini Champion 150 (Traktorenlexikon), field by field
Field	IN-trac 6.60 Turbo	Champion 150	Gap
Engine
Engine power, claimed claimed	148 hp	147.9 hp	—
Engine declared	KHD BF6L 913	SAME 1000.6 WTI-3 V	differs
Displacement declared	6.13 L	6.00 L	—
Maximum torque declared	395 lb·ft · 535 N·m	490 lb·ft · 665 N·m	+24% Champion 150
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	24.9 mph · 40 km/h	differs
Clutch declared	Hydraulic clutch	Hydraulically operated wet multi-plate clutch	differs
Hydraulics & hitch
Pump flow declared	14.8 gpm · 56.0 L/min	28.8 gpm · 109.0 L/min	+95% Champion 150
Pressure declared	—	2,176 psi · 150 bar	—
Three-point lift at ends declared	—	18,960 lb · 8,600 kg	—
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	13,889 lb · 6,300 kg	15,984 lb · 7,250 kg	+15% Champion 150
Maximum permissible mass declared	22,046 lb · 10,000 kg	23,149 lb · 10,500 kg	—
Wheelbase declared	106.4 in · 2,703 mm	108.3 in · 2,750 mm	—
Length declared	204.7 in · 5,199 mm	170.1 in · 4,320 mm	+20% IN-trac 6.60 Turbo
Width declared	94.1 in · 2,390 mm	96.5 in · 2,450 mm	—
Height declared	125.2 in · 3,180 mm	113.4 in · 2,880 mm	+10% IN-trac 6.60 Turbo
Ground clearance declared	22.8 in · 580 mm	20.5 in · 520 mm	+12% IN-trac 6.60 Turbo
Turning radius, braked declared	—	14.1 ft · 4.31 m	—
Fuel tank declared	285.3 qt · 270 L	401.5 qt · 380.0 L	+41% Champion 150

Source

Source