Deutz-Fahr DX 4.10 vs VALMET 605/605-4
7 material differences · fewer than 12
Which should you choose?
Read our verdict on the DX 4.10 and the 605/605-4 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
7 material differences · 7 fields identical or within 5%, which is not counted as material
| Field | DX 4.10 | 605/605-4 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 69.1 hp | 71.1 hp | — |
| Engine declared | KHD F4L 912 | VALMET TD 33 DS 6 | differs |
| Displacement declared | 3.77 L | 3.30 L | +14% DX 4.10 |
| Maximum torque declared | 175 lb·ft · 237 N·m | — | — |
| Transmission | |||
| Top speed declared | 18.6–24.9 mph · 30–40 km/h | 18.6 mph · 30 km/h | differs |
| Clutch declared | — | Pedal operated dry LuK single-disc clutch | — |
| Hydraulics & hitch | |||
| Pump flow declared | 10.6 gpm · 40.0 L/min | 13.9 gpm · 52.7 L/min | +32% 605/605-4 |
| Pressure declared | 3,481 psi · 240 bar | — | — |
| Three-point lift at ends declared | 8,378 lb · 3,800 kg | 8,699 lb · 3,946 kg | — |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 8,642 lb · 3,920 kg | 7,584 lb · 3,440 kg | +14% DX 4.10 |
| Wheelbase declared | 94.5 in · 2,400 mm | 93.2 in · 2,368 mm | — |
| Length declared | 163.0 in · 4,140 mm | 168.9 in · 4,290 mm | — |
| Width declared | 90.6 in · 2,300 mm | 80.3 in · 2,040 mm | +13% DX 4.10 |
| Height declared | 103.0 in · 2,615 mm | 105.1 in · 2,670 mm | — |
| Ground clearance declared | 16.7 in · 425 mm | 17.1 in · 435 mm | — |
| Turning radius, braked declared | 13.7 ft · 4.17 m | — | — |
| Fuel tank declared | 132.1 qt · 125 L | 190.2 qt · 180.0 L | +44% 605/605-4 |
Deutz-Fahr DX 4.10 sources
Source
- Source: Traktorenlexikon, “Deutz-Fahr DX 4.10”
- Source: Traktorenlexikon, “Deutz D 6006”
VALMET 605/605-4 sources
Source
- Source: Traktorenlexikon, “Valmet 605”