Deutz-Fahr AgroXtra 4.57 vs John Deere 3050 (A)

10 material differences · fewer than 12

Tractor one

1990–1995

No measured PTO figure

Tractor two

1986–1993

No measured PTO figure

Which should you choose?

Read our verdict on the AgroXtra 4.57 and the 3050 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 5 fields identical or within 5%, which is not counted as material

Deutz-Fahr AgroXtra 4.57 and John Deere 3050 (A), field by field
Field	AgroXtra 4.57	3050 (A)	Gap
Engine
Engine power, claimed claimed	—	90.8 hp	—
Engine declared	KHD BF4L 913	John Deere 6.359 DL-008	differs
Displacement declared	4.09 L	5.88 L	+44% 3050 (A)
Maximum torque declared	251 lb·ft · 340 N·m	251 lb·ft · 340 N·m	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	Independent dry double clutch	—	—
Hydraulics & hitch
Hydraulic centre declared	—	Closed centre	—
Pump flow declared	12.5 gpm · 47.3 L/min	13.8 gpm · 52.3 L/min	+11% 3050 (A)
Pressure declared	—	3,336 psi · 230 bar	—
Three-point lift at ends declared	11,464 lb · 5,200 kg	9,978 lb · 4,526 kg	+15% AgroXtra 4.57
Rear PTO speeds declared	540/1000/750 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	8,333 lb · 3,780 kg	8,642 lb · 3,920 kg	—
Maximum permissible mass declared	14,551 lb · 6,600 kg	14,771 lb · 6,700 kg	—
Wheelbase declared	96.1 in · 2,440 mm	100.4 in · 2,551 mm	—
Length declared	165.9 in · 4,215 mm	188.5 in · 4,787 mm	+14% 3050 (A)
Width declared	73.6 in · 1,870 mm	83.8 in · 2,129 mm	+14% 3050 (A)
Height declared	103.9 in · 2,640 mm	116.7 in · 2,964 mm	+12% 3050 (A)
Ground clearance declared	17.7 in · 450 mm	25.6 in · 650 mm	+44% 3050 (A)
Turning radius, braked declared	14.2 ft · 4.32 m	—	—
Fuel tank declared	137.4 qt · 130 L	127.9–182.8 qt · 121.0–173.0 L	differs

Source

Source